Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
1/22/2020 12:12:56 PM
Posted: 11/19/2012 8:56:20 AM EST
I've heard anecdotal stories of 2-stage triggers failing, hammers breaking, etc (mostly in the RRA's), but has anyone ever actually experienced a failure with one of these triggers? If so, what was the nature of the failure?
Link Posted: 11/19/2012 9:17:55 AM EST
free bump
Link Posted: 11/19/2012 10:24:57 AM EST
Heard the rumors, never have seen one break in 40 years of shooting the platform...
Link Posted: 11/19/2012 10:38:23 AM EST
I've shot the snot out of a couple SSAs without any drama. It's my understanding that the military uses the select fire version of the same system, so there must be no small confidence in it.

Moon
Link Posted: 11/19/2012 11:40:05 AM EST
I've read that breakages were usually due to 22 conversions.
Link Posted: 11/19/2012 11:56:56 AM EST
No.....shrps74
Link Posted: 11/19/2012 1:03:57 PM EST
Originally Posted By urbanredneck:
I've read that breakages were usually due to 22 conversions.


I have heard the same thing..

Link Posted: 11/19/2012 1:15:59 PM EST
Link Posted: 11/19/2012 2:51:35 PM EST
Never broken one after many years and many ARs
Link Posted: 11/19/2012 3:24:47 PM EST
Originally Posted By Duffy:
My old RRA 2 stage went from a two stage to an unpredictable single stage (never know when it'd drop the hammer), but that was a long time ago, I hear RRA had since fixed the problem.


Same issue I had with one of my RRA's. Started acting very strange then would no longer pass a function check. My triggers were from ten years ago so it might have changed. The other RRA held up just fine.

Over 5500 rounds on my SSA with no issues.

Link Posted: 11/19/2012 4:10:29 PM EST
[Last Edit: 11/19/2012 4:13:38 PM EST by Pain]
Yep, . RRA (2 sets) would loose the first stage and go real light. That was current triggers of last year.

I wasted my money on them.
Link Posted: 11/19/2012 6:35:22 PM EST
Link Posted: 11/19/2012 6:41:50 PM EST
Link Posted: 11/19/2012 6:45:09 PM EST
Originally Posted By Duffy:
Big Bore posted a thread years ago on how to fix it. White Oaks Armament used to (maybe still does) sell a tuned RRA 2 stage that doesn't have this problem.


That's fine, but I since replaced the triggers in all my ARs with Geissele Super Semi-Automatic (SSA) triggers. The warrantee that RRA has is good for some, but I hate having the same issues in different guns. I fixed the problem.
Link Posted: 11/19/2012 7:19:17 PM EST
Had a brand new CMMG 2-stage hammer snap in half the second time I cocked it while doing a functions check.

Kinda leary about putting 2 of their triggers in my next builds.
Link Posted: 11/19/2012 8:38:40 PM EST
RRA 2 stage tuned by Bill Springfield, about a thousand rds and it still feels like new.
Top Top