Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/20/2006 2:26:24 AM EST
New guy here with a question. I have an Olympic Arms P.C.R. that I acquired in trade years ago and never shot until this past weekend. It has an incredibly light trigger pull, so light that sometimes the gun doubles. When I open the gun up, I can see two screws in there that are obviously for trigger adjustment. I have no idea who made the trigger and I am guessing that the one at the rear is to limit overtravel of the trigger and the forward one adjusts the force required to fire the gun. Am I guessing correctly? In any case, I need to increase the amount of force required to drop the hammer. It is much to light for practical use or safety. I tried a search for trigger adjustment but came up with nothing. Any advice or comments would be appreciated. Thanks.
Also, is there any way to subscribe to a post?
Link Posted: 2/20/2006 3:52:12 AM EST
Try to find out who manufactured the trigger. Check the industry section to see if you see one like it for sale, Then come back and post. Someone here will probably know what you need to do.
Link Posted: 2/20/2006 5:07:52 AM EST
[Last Edit: 2/20/2006 5:13:45 AM EST by Dano523]
Link Posted: 2/20/2006 5:47:22 AM EST
Great pictures Dano. Looking at it from the top, I believe the JP trigger looks to be the closest configuration to what is in the gun now. Is the front screw threaded into the same piece of metal that the trigger is made of or is it a separate piece? It looks like it may be separate in my gun. I haven't taken the trigger assembly out and want to avoid doing so if I can but if it is required I'll do it.
Link Posted: 2/20/2006 6:28:14 AM EST
Top Top