Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Page / 112
Link Posted: 4/21/2020 12:03:08 PM EST
Discussion ForumsJump to Quoted PostQuote History
View Quote

This needs an NSR on it so bad.
Link Posted: 4/21/2020 12:41:17 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By TinyCrumb:

This needs an NSR on it so bad.
View Quote

I've considered the NSR but I just don't like how it mounts with the screws on the outside of the rail.  The KMR is my favorite rail - have them on all of my guns with only a couple exceptions.
Link Posted: 4/21/2020 2:47:47 PM EST
Link Posted: 4/22/2020 2:39:30 PM EST


Link Posted: 4/24/2020 11:11:25 PM EST
[Last Edit: 1/24/2021 2:38:27 PM EST by VitalSignsAbsent]
13.7 and 14.5

Link Posted: 5/11/2020 2:38:53 PM EST
[Last Edit: 5/14/2020 7:09:01 PM EST by jsxtreme]
I’ve had this rifle laying around for quite some time. Finally got motivated to finish it as a home defense build.

- Noveske 14.5” Skinny N4 complete, pinned and welded flash hider at 16.1” OAL.
- Magpul MVG vert grip
- Magpul MOE rail section
- Trijicon MRO
- Trijicon MRO absolute co-witness quick release mount
-Streamlight rail mount 1 long gun light - 350 lumens
- SOE Sling


" />
Link Posted: 5/14/2020 7:35:50 PM EST
Another angle since I got photos working.

Link Posted: 5/16/2020 11:05:18 AM EST
[Last Edit: 5/16/2020 11:07:56 AM EST by Rhinowso96]


Noveske Complete Factory 5.56MM Upper N4 Lo-Pro Chrome lined 14.5" Barrel w/ Switchblock w/pinned 51T Blackout FH (2012)
Noveske Gen 3 lower (2016)

Paired them in 2016 when I got the Noveske lower, it had been on a Mega lower up until that time.
Link Posted: 6/1/2020 1:00:27 AM EST
Went out this weekend to shoot some piggy’s at night.



Good times
Link Posted: 6/2/2020 12:32:13 PM EST
Link Posted: 6/7/2020 6:07:45 AM EST
Link Posted: 6/23/2020 4:18:08 AM EST
Noveske SPR build getting the job done with MK262
Link Posted: 8/17/2020 10:58:19 PM EST
[Last Edit: 8/17/2020 10:58:50 PM EST by Rezarf2]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By TheHorrorTheHorror:
Noveske fanBoi spotted on NBC.com

https://www.AR15.Com/media/mediaFiles/368687/Noveske_fanBoi_jpg-1450709.JPG
View Quote


"Here babe, carry my spare mag."

...and here I have spent all this coin on HSGI kit. This man is a legend.
Link Posted: 8/18/2020 11:48:56 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Rezarf2:


"Here babe, carry my spare mag."

...and here I have spent all this coin on HSGI kit. This man is a legend.
View Quote

Link Posted: 8/18/2020 11:52:47 AM EST
Discussion ForumsJump to Quoted PostQuote History


Would this be consider an "in the wild" pic?
Link Posted: 8/18/2020 12:01:29 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Rezarf2:


"Here babe, carry my spare mag."

...and here I have spent all this coin on HSGI kit. This man is a legend.
View Quote


It's like having a squire.  

Cheers
Link Posted: 8/18/2020 12:37:02 PM EST
Link Posted: 8/18/2020 12:42:32 PM EST
Discussion ForumsJump to Quoted PostQuote History

Nice pair but your uppers need to be switched around
Link Posted: 8/18/2020 12:48:42 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Bhavin22:

Nice pair but your uppers need to be switched around
View Quote


LOL They really do!  I filed to SBR the nicer of the lowers before I decided to start doing a CQBR-ish rifle.  Oops  
One day I'll get around to filing for the other lower so I can swap them back the correct way lol
Link Posted: 8/18/2020 2:00:18 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By ShiftSix:


LOL They really do!  I filed to SBR the nicer of the lowers before I decided to start doing a CQBR-ish rifle.  Oops  
One day I'll get around to filing for the other lower so I can swap them back the correct way lol
View Quote

Do it while they have efile still. My efile took 15 days while my paper file took 7 months
Link Posted: 8/19/2020 9:53:19 AM EST
[Last Edit: 8/19/2020 9:54:33 AM EST by officerX]
Noveske marked BCG in stock at Primary Arms - $185.25

Noveske Rifleworks M16 Bolt Carrier Group - Nitride

Attachment Attached File
Link Posted: 9/10/2020 7:03:40 AM EST
I wish Noveske could get some stuff in stock. I need a 12.5 stainless steel barrel and I need a NSR Mlok rail to finish my pistol.
Link Posted: 9/10/2020 1:38:49 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By TBone556:
I wish Noveske could get some stuff in stock. I need a 12.5 stainless steel barrel and I need a NSR Mlok rail to finish my pistol.
View Quote


I've had a stripped upper on backorder since April. No ETA.

I managed to snag a 7.94" diplomat barrel during the Memorial Day sale though. Just waiting on that upper.
Link Posted: 9/21/2020 7:37:04 PM EST
Link Posted: 9/21/2020 8:36:25 PM EST
Discussion ForumsJump to Quoted PostQuote History

You owe me a new keyboard.
Link Posted: 9/21/2020 9:11:16 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By SecretSquirell:

You owe me a new keyboard.
View Quote


Lol.  picked that up in Palm Beach, late 2015.  All my friends laughed at the idea of DJT as president.  I knew, knew all along.
Link Posted: 9/21/2020 9:22:12 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By ThaFuq:


Lol.  picked that up in Palm Beach, late 2015.  All my friends laughed at the idea of DJT as president.  I knew, knew all along.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By ThaFuq:
Originally Posted By SecretSquirell:

You owe me a new keyboard.


Lol.  picked that up in Palm Beach, late 2015.  All my friends laughed at the idea of DJT as president.  I knew, knew all along.

Would be an awesome gun room wall-hanger.
Link Posted: 9/22/2020 5:50:23 AM EST
Looking forward to black friday sales to finally pick up N6 Receiver set/NSR rail and build out a Noveske large frame
Link Posted: 9/22/2020 6:16:05 AM EST
[Last Edit: 9/22/2020 6:44:29 AM EST by PFran42]
Has anyone taken a stab at a Noveske DEVGRU clone?  

Attachment Attached File


Attachment Attached File


This is from Noveske but it shows 5 M-LOK slots (vs. 4 on the "in the wild" pic).

Attachment Attached File


Attachment Attached File
Link Posted: 9/22/2020 5:41:18 PM EST
@TinyCrumb ^^^
Link Posted: 9/23/2020 12:55:06 PM EST
[Last Edit: 9/23/2020 12:56:24 PM EST by TinyCrumb]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PFran42:
Has anyone taken a stab at a Noveske DEVGRU clone?

This is from Noveske but it shows 5 M-LOK slots (vs. 4 on the "in the wild" pic).
View Quote

Yeah, I did one. The image you posted from Noveske is a Gen 4 and isn't related to the dev rifle at all. Just their newer civilian rifle. Here's the build list if you want to build one:

- The 300 and 5.56 are identical other than the marking on the port door and the gas length. 300 is pistol length and 5.56 is carbine.
- Noveske Gen 1 lower. The contract FA ones come from their own batch, the closest you’ll get is one of the newer F-prefix lowers that have the new engraving style.
- Noveske Gen 3 upper receiver, 2nd version
- Noveske NSR-9 M-LOK
- Noveske 10.5” “Navy profile” barrel - Profile was custom built/spec’d for dev. Fairly close to their “lightweight contour”. There’s only a handful of these in civilian hands and they’re not planning on offering them, so you might need to substitute with something else.
- Noveske TiN NSR screws (not publicly available)
- Noveske caliber-marked port door (not publicly available)
- Noveske rear QD sling plate
- Noveske / Geissele ACH charging handle - both colors are used
- Magpul MOE-K2 Grip / FDE
- Magpul MOE SL-K Stock / FDE
- Magpul trigger guard / FDE
- Dead Air Sandman-S
- Cerakote FDE - Only the can body is coated.
- Optics/lights/lasers are supplied by the customer, but all ITW so far have been a combination of NGAL and Surefire with either Aimpoint T2 or Nightforce ATACR 1-8.

My Sandman is in jail so I have the wrong can on mine for now:

Link Posted: 9/27/2020 2:18:49 PM EST
Is that a scalarworks absolute or 1/3?
Link Posted: 9/27/2020 4:25:43 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By geewizz:
Is that a scalarworks absolute or 1/3?
View Quote

Whose gun are you referring to?
Link Posted: 9/27/2020 7:12:56 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By TinyCrumb:

Yeah, I did one. The image you posted from Noveske is a Gen 4 and isn't related to the dev rifle at all. Just their newer civilian rifle. Here's the build list if you want to build one:

- The 300 and 5.56 are identical other than the marking on the port door and the gas length. 300 is pistol length and 5.56 is carbine.
- Noveske Gen 1 lower. The contract FA ones come from their own batch, the closest you’ll get is one of the newer F-prefix lowers that have the new engraving style.
- Noveske Gen 3 upper receiver, 2nd version
- Noveske NSR-9 M-LOK
- Noveske 10.5” “Navy profile” barrel - Profile was custom built/spec’d for dev. Fairly close to their “lightweight contour”. There’s only a handful of these in civilian hands and they’re not planning on offering them, so you might need to substitute with something else.
- Noveske TiN NSR screws (not publicly available)
- Noveske caliber-marked port door (not publicly available)
- Noveske rear QD sling plate
- Noveske / Geissele ACH charging handle - both colors are used
- Magpul MOE-K2 Grip / FDE
- Magpul MOE SL-K Stock / FDE
- Magpul trigger guard / FDE
- Dead Air Sandman-S
- Cerakote FDE - Only the can body is coated.
- Optics/lights/lasers are supplied by the customer, but all ITW so far have been a combination of NGAL and Surefire with either Aimpoint T2 or Nightforce ATACR 1-8.

My Sandman is in jail so I have the wrong can on mine for now:

https://i.imgur.com/wF1ui9Y.jpg
View Quote


Wow... For once, the clone gods are smiling down on me. I just happen to have a SBR’d gen 1 Noveske lower and 80% of the parts on hand.
Link Posted: 9/30/2020 10:44:56 PM EST
@TinyCrumb

You see this yet?

Attachment Attached File
Link Posted: 10/1/2020 11:01:06 AM EST
[Last Edit: 10/1/2020 11:13:17 AM EST by TinyCrumb]
Discussion ForumsJump to Quoted PostQuote History
View Quote

I don't think so? What's the context? Someone building an airsoft clone? I don't follow the airsoft world too closely.

Looks like they're generally on the right track. Missing the right upper receiver and then obviously a lot of those parts are not as close to the real ones as they could be. But if they got it cerakoted I suppose they'd be "close enough" from a few feet away…
Link Posted: 10/1/2020 8:55:18 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By TinyCrumb:

I don't think so? What's the context? Someone building an airsoft clone? I don't follow the airsoft world too closely.

Looks like they're generally on the right track. Missing the right upper receiver and then obviously a lot of those parts are not as close to the real ones as they could be. But if they got it cerakoted I suppose they'd be "close enough" from a few feet away…
View Quote


@TinyCrumb

Way to let me down easy...

I’m thinking about making a real go at this. What is the difference between the gen 3 v1 and v2 uppers?

Attachment Attached File
Link Posted: 10/1/2020 9:46:31 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PFran42:


@TinyCrumb

Way to let me down easy...

I’m thinking about making a real go at this. What is the difference between the gen 3 v1 and v2 uppers?

https://www.AR15.Com/media/mediaFiles/309598/D9D90FEB-7F7E-4C89-A4E3-AD9BE778DE5C_jpe-1615640.JPG
View Quote


Maybe hit me up on PM so we’re not clogging up the pic thread. But the upper in your pic isn’t a Gen 3, it’s a vltor which were used on Gen 2 builds and some transitional builds. When they went to the Gen 3 upper the first version had the Noveske engraving in a similar spot, the cross on the top IIRC, and then slab side on the bolt catch slide. The later versions had a “NOVESKE” logo engraving there. That’s the one you want.

Shoot me a message and I can help out with any questions. It’s a fun build, I highly recommend it.
Link Posted: 10/2/2020 3:58:38 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By TinyCrumb:


- Noveske Gen 1 lower. The contract FA ones come from their own batch, the closest you’ll get is one of the newer F-prefix lowers that have the new engraving style.
- Noveske Gen 3 upper receiver, 2nd version

https://i.imgur.com/wF1ui9Y.jpg
View Quote


This is awesome, the details and specs your provided..very educational.

I was starting to feel I need to upgrade my original Gen1 lower to run with my Gen3 upper..but the Gen1 lowers I have are sentimental and I haven’t even shot them yet, thanks for this post.
Link Posted: 10/3/2020 8:13:03 AM EST
[instagram]https://www.instagram.com/p/CF2K2E1lLUH/?igshid=1eqihbahtufs0[/instagram]

Finally finished.
Link Posted: 10/5/2020 7:23:33 AM EST
[Last Edit: 10/5/2020 11:10:47 AM EST by PFran42]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By ImpendingDom21:
[instagram]https://www.instagram.com/p/CF2K2E1lLUH/?igshid=1eqihbahtufs0[/instagram]

Finally finished.
View Quote


Attachment Attached File


Attachment Attached File


Nice! I had an opportunity to pick up the Short Dot but I passed b/c I was in the middle of purchasing a Razor 1-10x. I still have an empty ADM/Noveske extended mount waiting for the next chance I get.

I’ve got the other correct bits like the Cerakoted charging handle and correct selector but I’m a lefty so I swapped out for ambi parts.

Attachment Attached File
Link Posted: 10/5/2020 7:29:18 AM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By PFran42:


Nice! I had an opportunity to pick up the Short Dot but I passed b/c I was in the middle of purchasing a Razor 1-10x. I still have an empty ADM/Noveske extended mount waiting for the next chance I get.

I’ve got the other corrects bits like the Cerakoted charging handle and correct selector but I’m a lefty so I swapped out for ambi parts.

https://www.AR15.Com/media/mediaFiles/309598/F5D697E8-49B5-4201-8F72-262407D13C50_jpe-1620967.JPG
View Quote


That's a great looking rig.  I need to dig this guy out and shoot it more often.  OG Gen 1 lower #00075.  Anyone know why Noveske never produced a Switchblock compatible NSR rail for 556?



Cheers
Link Posted: 10/5/2020 10:40:51 AM EST
[Last Edit: 10/5/2020 10:43:58 AM EST by officerX]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By ImpendingDom21:
[instagram]https://www.instagram.com/p/CF2K2E1lLUH/?igshid=1eqihbahtufs0[/instagram]

Finally finished.
View Quote

Attachment Attached File


Love it.  

Details, please.
Link Posted: 10/5/2020 11:45:21 AM EST
[Last Edit: 10/5/2020 11:48:08 AM EST by PFran42]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By officerX:

https://www.AR15.Com/media/mediaFiles/335460/Capture_JPG-1621117.JPG

Love it.  

Details, please.
View Quote


@officerX

Attachment Attached File


Attachment Attached File


Attachment Attached File


Attachment Attached File


Attachment Attached File


(continued in next post...)
Link Posted: 10/5/2020 11:45:34 AM EST
[Last Edit: 10/5/2020 11:47:33 AM EST by PFran42]
Link Posted: 10/5/2020 12:53:14 PM EST
Originally Posted By ImpendingDom21:
[instagram]https://www.instagram.com/p/CF2K2E1lLUH/?igshid=1eqihbahtufs0[/instagram]

Finally finished.
View Quote

Originally Posted By PFran42:


https://www.AR15.Com/media/mediaFiles/309598/120367911_328533161571756_25459410899211-1621148.JPG

https://www.AR15.Com/media/mediaFiles/309598/120367911_328533161571756_25459410899211-1621153.JPG

Nice! I had an opportunity to pick up the Short Dot but I passed b/c I was in the middle of purchasing a Razor 1-10x. I still have an empty ADM/Noveske extended mount waiting for the next chance I get.

I’ve got the other correct bits like the Cerakoted charging handle and correct selector but I’m a lefty so I swapped out for ambi parts.

https://www.AR15.Com/media/mediaFiles/309598/F5D697E8-49B5-4201-8F72-262407D13C50_jpe-1620967.JPG
View Quote

Where the hell did you all find gen 2 lowers?
Link Posted: 10/5/2020 12:53:35 PM EST
I still have that magazine hard copy, that's what made me want to build my Noveske!!
Link Posted: 10/5/2020 12:57:24 PM EST
[Last Edit: 10/5/2020 12:58:56 PM EST by PFran42]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Fordtough25:
I still have that magazine hard copy, that's what made me want to build my Noveske!!
View Quote


#MeToo

I created a trust within 24 hours of seeing that article in 2012. Before that, I had a gun show DPMS Oracle with about $8700 worth of Magpul furniture on it. Noveske taught me that This Is The Way.

Re: gen 2 lowers, I got all of mine from Rifle Gear back in 2012.
Link Posted: 10/5/2020 1:29:36 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By officerX:


Where the hell did you all find gen 2 lowers?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By officerX:
Originally Posted By ImpendingDom21:
[instagram]https://www.instagram.com/p/CF2K2E1lLUH/?igshid=1eqihbahtufs0[/instagram]

Finally finished.

Originally Posted By PFran42:


https://www.AR15.Com/media/mediaFiles/309598/120367911_328533161571756_25459410899211-1621148.JPG

https://www.AR15.Com/media/mediaFiles/309598/120367911_328533161571756_25459410899211-1621153.JPG

Nice! I had an opportunity to pick up the Short Dot but I passed b/c I was in the middle of purchasing a Razor 1-10x. I still have an empty ADM/Noveske extended mount waiting for the next chance I get.

I’ve got the other correct bits like the Cerakoted charging handle and correct selector but I’m a lefty so I swapped out for ambi parts.

https://www.AR15.Com/media/mediaFiles/309598/F5D697E8-49B5-4201-8F72-262407D13C50_jpe-1620967.JPG

Where the hell did you all find gen 2 lowers?


2013. Chainsaw Gen 2 for me. Will ETA pics later.
Page / 112
Top Top