Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 5/9/2004 1:22:08 PM EST
If I were to order a preban upper, for my pre ban lower ofcourse, then later decided to upgrade said upper with a float tube/rail system, is it difficult ro remove a flash hider like the standard A2 or a Phantom then put it back on again?

Link Posted: 5/9/2004 1:59:40 PM EST
If its a 16" barrel, nope. Easy as pie. Under 16" barrel made legal,if it's been pinned/welded/whatever, might be a little harder. Ive heard of it being done, but the FH was destroyed.

Link Posted: 5/10/2004 1:50:59 AM EST
The real problem is when the FF tube has it's own barrel nut and you have a FSB which would have to be removed. The standard FSB taper pins can be a biyach sometimes.
Link Posted: 5/10/2004 3:19:37 AM EST

Originally Posted By AK_Mike:
The real problem is when the FF tube has it's own barrel nut and you have a FSB which would have to be removed. The standard FSB taper pins can be a biyach sometimes.



Roger that.
Top Top