Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/5/2006 1:22:08 PM EST
How do the Tacpoints sight in. I just came back from the range and the knobs say up R and up L on the sides. I had great groups that were 3-4" to the left of the bulls eye, then I would turn the knob that said up-R and it would be 3-4" high but dead center. I have one ring mounted to a cantilever mount in the removable handle. Why isnt this scope like an ordinary scope? One knob for windage and one for elevation. It appears they both move the elevation up?

I am sure I am missing something obvious to most...
Link Posted: 3/5/2006 10:16:00 PM EST
top knob will be elevation, side is windage.
Link Posted: 3/6/2006 9:43:23 AM EST
From what I can tell there is no top knob, there is one on the left and one on the right. I guess it depends on how you have it mounted in the ring.
Mine is mounted so the top of the scope is the electronics tube for the battery and rotating knob to turn it off and on.

One Knob shows Up-L
One knob shows Up-R

If I move the up-r knob clockwise it does bring point of impact down but it also moves it to the left. Very strange. Is this a bad scope perhaps?

I cant believe this didnt come with any instructions or a web site at all.
Top Top