After talking with you on the phone all my previous questions were answered.
HOWEVER I need to know if the suppressor is enclosed in the rear and rests on the collar or is open and the mount acts as the suppressor interior. Mike at ABS claims some genteration of Troy suppressor is open internally to the barrel and direct gas to the carbon fiber barrel will destroy it. Please let me know ASAP. I have already sent the money for the barrel and dont want the whole project ruined because I did not get all the needed info.
Snip from EMail
>I just found out when talking to Mike at ABS, that the Troy suppressor
> will NOT work on the ABS barrels.
> According to Mike, this design is open to the barrel area that is covered
> by the suppressor, and it will destroy the carbon material that is exposed
> to the hot gasses.
> Apparently this is a design that Mike Rock was involved in, and Mike has
> tried it on the ABS barrels, and it was not successful.
> Unless Troy has done something to enclose this suppressor internally
> around the barrel and protect the barrel surfaces, this isn't going to be
> something that can be put on ABS barrels.
> Please let me know your reaction to this matter, and what we can do about
> it.