Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/11/2003 9:16:34 AM EST
[Last Edit: 6/11/2003 9:17:04 AM EST by Zak-Smith]
I have a TA11 on order. It will be put on my RRA flat-top and used for 3Gun, etc.

In the absence of any rail, it looks like my mounting options are:

TA51,
ARMS #10,
ARMS #19ACOG,
ARMS #19S.

The TA11 has two screw holes on its bottom rail, correct? If so, I would prefer to use two screws to hold the ACOG to the mount.

Will the TA11 fit properly on the #19S ?
Can I use two screws with the TA11 + #19S ?

Will the #19S allow the TA11 to be mounted more forward on the flat-top rail than the #19ACOG would?

Does anyone have a picture of the TA11 + #19S configuration?

thanks
Zak
Link Posted: 6/11/2003 11:39:29 AM EST
The TA11S has two screw holes although the scope comes with one, IIRC. Drop by the hardware store and pick up a spare. The 19S is a perfect fit and is basically the exact length of the ACOG foot. It also allows the use of both screws.
Link Posted: 6/11/2003 11:58:29 AM EST
From the picture posted by MSTN, it looks like the #19S has four holes drilled. Why 4 if only 2 are used? -z
Link Posted: 6/11/2003 12:10:17 PM EST
Link Posted: 6/11/2003 1:24:33 PM EST
Does anyone have a picture of the TA11 + #19S configuration?
View Quote
Yes, The TA11 will fit with no problem on a ARMS #19S. [img]www.armscenter.com/xm777/DSCN1731.jpg[/img]
Link Posted: 6/11/2003 8:07:33 PM EST
Link Posted: 6/16/2003 9:05:41 AM EST
[Last Edit: 6/16/2003 9:06:07 AM EST by Bartholomew_Roberts]
Here is an example of what Troy talked about regarding forward mounting: [img]http://www.ont.com/users/kolya/AR15/AR15_2.jpg[/img]
Link Posted: 6/16/2003 9:41:09 AM EST
In the configuration posted by Bartholomew_Roberts, can two screws still be used? -z
Link Posted: 6/16/2003 10:47:34 AM EST
Yes, in that picture the scope is mounted with two 10/32 screws.
Link Posted: 6/16/2003 10:02:39 PM EST
IMHO the #19s " IS " the perfect mount for the TA11 PP out
Link Posted: 6/17/2003 4:00:13 AM EST
Pow! [img]http://www.imagestation.com/picture/sraid60/p4846bf0d77360a7e2ebf0817e5ac5534/fc54266f.jpg[/img]
Link Posted: 6/17/2003 1:34:45 PM EST
Is some space UNDER the rear of the #40 normal? I have a couple sheets-of-paper-width of clearance? -z
Link Posted: 6/17/2003 1:59:53 PM EST
Of course I got to throw in my two cents [:p] [img]www.imagestation.com/picture/sraid60/p0370c9afd7e6b9e0a0e2bdfa52d725c3/fc504696.jpg[/img]
Link Posted: 6/25/2003 3:15:28 AM EST
[Last Edit: 6/25/2003 3:49:19 AM EST by dcobra23]
What if mounting on the #38 sleeve super ext mod on my spr rifle? The TA11 on the 19s on the #38. Will it be too high?[img]http://photos.yahoo.com/bc/dcobra223/vwp?.dir=/ar+stuff&.src=ph&.dnm=SPR.jpg&.view=t&.done=http%3a//photos.yahoo.com/bc/dcobra223/lst%3f%26.dir=/ar%2bstuff%26.src=ph%26.view=t[img]
Link Posted: 6/25/2003 3:57:30 AM EST
It will be high. "Too high"? That's up to you. Personally, I'd just stick an ARMS#40 behind it. The additional height of the 38 serves no purpose here, if you don't want it.
Link Posted: 6/27/2003 5:46:04 PM EST
TA11 on 19S, + ARMS #40, is there still room for RAS II?
Link Posted: 6/27/2003 9:48:52 PM EST
Link Posted: 6/28/2003 6:00:02 AM EST
Kisara I don't have an ARMS #40 but a KAC 300M but I think their mounting position is the same, so it should fit. [img]www.imagestation.com/picture/sraid63/p51100528a291eebfd6ca64abbbf762f8/fc188b77.jpg[/img]
Link Posted: 6/29/2003 4:31:19 AM EST
Set the TA11 on my rifle today and its so sweet! Not too high for me. Now all I need is some range time, just me and my TA11. Thanks guys. Chris
Link Posted: 6/30/2003 7:11:38 PM EST
Thanks, maybe I'll just stick with the K-300 on that rifle to "Keep it all Knight's". The 40 can stay with my future SIR, when/if they make an M model of the Bi-Level.
Top Top