Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/14/2004 10:18:44 AM EST
I have a pinned/neutered RRA telestock on my AR, and want to swap out for a new 6 position. Is the spring/buffer assembly the same between the fake and real ones? If so, couldn't I just unscrew the castle nut, holding the retaining plate in place, and not have to screw with removing buffer retainer, detent spring, and other highly "loss-prone " parts??
Link Posted: 9/14/2004 3:49:48 PM EST

Originally Posted By xray:
I have a pinned/neutered RRA telestock on my AR, and want to swap out for a new 6 position. Is the spring/buffer assembly the same between the fake and real ones? If so, couldn't I just unscrew the castle nut, holding the retaining plate in place, and not have to screw with removing buffer retainer, detent spring, and other highly "loss-prone " parts??



You will need to swap out the whole thing. The newer 'M4' styled telestocks use a rifle buffer and spring. Even if you had the older CAR styled stock with a carbine buffer and spring, you need to change out the receiver extention.

Just work slowly and you should be fine.
Top Top