Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 6/18/2003 2:02:59 PM EDT
The threads in my lower where the grip screw mounts is stripped?? Can i simply re tap it?
Link Posted: 6/18/2003 2:06:06 PM EDT
I'd say it depends on how bad (?) you could run a tap down it and see what you get. or, you could [url=http://www.emhart.com/products/helicoil.html]Heli-Coil[/url] it.
Link Posted: 6/18/2003 2:17:58 PM EDT
might try a slighly longer bolt....did it strip all the threads....
Link Posted: 6/18/2003 3:02:02 PM EDT
[Last Edit: 6/18/2003 3:10:27 PM EDT by shortbus]
looks like only the 1st & 2nd threads are stripped. Do u know what thread size it is? 1/4-28?
Link Posted: 6/19/2003 9:35:35 PM EDT
It is 1/4-28 -hanko
Link Posted: 6/22/2003 9:28:17 AM EDT
Try "chasing" (cleaning up) the threads by running a 1/4-28 tap in from the top of the hole rather than from the bottom. Coming in from the bottom, you tap may not engage properly and you could ruin ALL the threads.
Top Top