Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 11/30/2007 6:21:04 PM EDT
I need a couple of the screws for securing ARMS mounts to the bottom of the ACOG channel assembly. Trijicon wants $10 for a screw (and the cup shaped washer-which I don't need). Does anyone know the specs for the screw? Is it something I could pick-up at the hardware store for pocket change? I don't want to pay $10 for a screw if I don't have to.

THANKS!
Link Posted: 11/30/2007 9:44:34 PM EDT
Yes actually it is something you can get.

It might be a #8 or #10. Take the scope in. Try them out. Noone should say anything.

They do have them though.

I ended up needing one for the TA51 mount. I found the panhead screw in SS and the washer for it.

Have fun!
Link Posted: 12/1/2007 2:50:52 AM EDT

Originally Posted By Escape_from_NY:
I need a couple of the screws for securing ARMS mounts to the bottom of the ACOG channel assembly. Trijicon wants $10 for a screw (and the cup shaped washer-which I don't need). Does anyone know the specs for the screw? Is it something I could pick-up at the hardware store for pocket change? I don't want to pay $10 for a screw if I don't have to.

THANKS!


They can be found at your local hardware store...I've got the size written down at home but won't be home until late. I'll try to remember if someone hasn't posted the size by then to get back to you.
Link Posted: 12/1/2007 4:58:48 PM EDT

Found it...

10-32 x 1/2

or

10-32 x 3/8

Either one should work just fine.
Link Posted: 12/1/2007 5:57:04 PM EDT
THANK YOU!
Top Top