Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/22/2006 6:04:35 AM EST
I bought a Dalphon lower (made by Mega Machine I think) from Comp1911 (who is a excellent person to do business with). The lower looks great, great condition. My upper, DPMS 20" varmit barrel is a very tight fit. I very carefully took off the edges of the rear lug on the upper so it would close. I can push the rear pin in with my hand tho it is tight, but I have to use a tool (golf tee) to push the rear pin out. The front pin comes out easily once the rear is out. So, should I be concerned about a very tight fit? Should I take it to a gunsmith to get it properly fitted? Am I obsessing too much, should I quit worrying and just shoot it and it will loosen up with use.
Thanks.....
Steve Rodgers
Link Posted: 3/22/2006 6:12:21 AM EST
A tight fit is a good thing. I wouldn't worry about it unless it is so tight you can't mate the upper and lower, otherwise it's good to go.
Link Posted: 3/22/2006 8:51:44 AM EST
[Last Edit: 3/22/2006 8:53:06 AM EST by wildearp]
It is normal. About half of mine are like that. It might loosen up after a few thousand rounds.
Link Posted: 3/22/2006 9:20:42 AM EST
In my opinion its Awesome!
Link Posted: 3/22/2006 9:24:00 AM EST
you're obssessing too much.

if it functions correctly you're good to go.

as others have said, a tight fit is good.
Top Top