Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/16/2003 10:03:13 AM EST
I just bought a couple of 90% Adventurline 20 rounders at a gunshow this weekend, and was suprised to find they have quite a snug fit in the magwells of all 3 or my AR's. Not that they won't come out, but one doesn't quite drop free. They don't appear to be bulged, dented, etc. Has anyone else experienced this with Adventurline 20's?
Link Posted: 12/16/2003 12:26:07 PM EST
I got 3 Adventureline 20s and one of them is like that. Also you have to sit them hard or the bolt won't lock open.
Link Posted: 12/17/2003 7:51:40 AM EST
Adventureline 20s have a rather thick coat of finish on them. The snug fit should be considered normal. That's a bit of a down side to the thick coat but the upside is the coat is very durable compared to early contract Colt 20s. Sly
Link Posted: 12/19/2003 2:38:48 PM EST
Easiest way to make them drop free is put them in a bench vice and squeeze it SLOWLY to put a little bit of pressure on the feedlips. I've done this with several of my mags, all work 100%. Just do it gradually until the mag will drop free.
Link Posted: 12/19/2003 2:53:44 PM EST
This thread may help you. I've been there and done that. [url]http://www.ar15.com/forums/topic.html?b=3&f=17&t=147932&w=searchPop[/url] Danny
Top Top