Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/22/2003 3:52:08 PM EST
[Last Edit: 6/22/2003 3:53:12 PM EST by Badfinger]
Man I just found the greatest thing since sliced bread! It's called Slip 2000 gas piston and choke cleaner. I was at the Ohio State trap and found a vendor selling this stuff. I bought it for my shotgun but after talking to him he told the Marines are using it for their weapons. It was $14.50 for a 16oz jar with little metal hangers inside. I took my Ar-15 bolt, complete and dropped it in this stuff for about 20 minutes. I took it out dried it off and disassembled it. ALL the carbon wiped off like black grease and my bolt is green again! Forget that twenty-five dollar scraper. I also took the cylinder out of my stainless 686 Smith that hasn't been cleaned in over 400 rounds and the same results. It looks like it was never fired! This stuff is great.

Shoot well,


Web site http://www.slip2000.com
Link Posted: 6/22/2003 7:38:34 PM EST
[Last Edit: 6/22/2003 7:40:24 PM EST by G35]
[url]http://www.slip2000.com[/url] [img]http://www.slip2000.com/media/cleaner/before-after-cu.jpg[/img]
Link Posted: 6/22/2003 9:25:24 PM EST
Holy shit!!! That's just the thing my AK piston needs!!! No more scrubbing for an hour!!
Link Posted: 6/22/2003 9:31:21 PM EST
How did you dry out the inside of the bolt?
Link Posted: 6/22/2003 10:12:20 PM EST
Originally Posted By AgentFork: How did you dry out the inside of the bolt?
View Quote
You just disassemble it and wipe it out. Q-tip might help on the firing pin side.
Link Posted: 6/23/2003 7:52:45 PM EST
This looks like great stuff, I think I will order some.
Link Posted: 6/27/2003 12:01:39 PM EST
This works great. Hard to get to locally in Las Vegas- a drive to Pahrump, NV about 60 miles out. I used it to clean my Pistols and my Bushmaster in a little plastic dishpan. No noxious chemicals or skin eating. I even reused the liquid in the dishpan ot soak my bolt and bolt carrier. Clean as a whistle. I used a can of air to blow out the trigger group and little crevices. Since it is water based. Then, I CLP'd the upper, lower housing and FP-10'd the trigger group, barrell and recoil spring.
Link Posted: 6/27/2003 12:26:08 PM EST
This is one of those Orange oil products...Remember when that shit (Rinds) was garbage??? Somebody deserves credit but who?
Link Posted: 6/27/2003 7:25:41 PM EST
Originally Posted By W-W: This is one of those Orange oil products...Remember when that shit (Rinds) was garbage??? Somebody deserves credit but who?
View Quote
That's what this product reminds me of. Thanks for jogging me memory. Yeah, I was kind of sketched with it being water based. But, it worked out good.
Link Posted: 7/6/2003 3:51:18 AM EST
I'm sold. I got some and tried it. It's a keeper. There's another thread going that says it's no so hot. I couldn't disagree more. I clean M16's in mass and have found a new tool against carbon.
Link Posted: 7/6/2003 10:41:12 AM EST
I just tried it on my bolt and bolt carrier, and those two spots where the carbon builds up (by the back of the firing pin) are finally clean. I also dipped the slide of my springfield mil-spec operator in, and it turned out incredible. No matter what I put on that slide, I still had scratches/marks left from foreign material that I couldnt get off. The slip 2000 took all of it off and made my slide look damn near perfect. I wish I had a before and after picture to show you guys... Also, if you are like me and dont particularly like the brass marks left behind on slides of your guns from spent cases hitting them...I also dipped my HK USP slide in for about 15 minutes, and it took off the brass marks as well. Sorry if I sound like a slip spokesman, but this stuff is incredible.
Top Top