Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/27/2005 9:20:58 AM EDT
I got a great deal on a TAO1NSN but I did not get a manual with it. I'm assuming that it is designed to be zeroed at 100 meters to get it properly calibrated. Could some one with a manual please confirm this? In addition, I have access to a 100-yard or a 200-yard range. Is there some trick to get it calibrated correctly as I am almost positive that the reticule is metric? Thanks.
Link Posted: 8/27/2005 11:03:56 AM EDT
You are correct.
Link Posted: 8/27/2005 11:16:20 AM EDT
[Last Edit: 8/27/2005 11:54:36 AM EDT by TRDBuckshot]

Originally Posted By inkaybee:
You are correct.



Thanks! Any opinion on how to convert from zeroing on a 100 yard range to 100 meters. I guess I could take a tape measure and measure it off but that is assuming no one else is out on the 200 yard range.
Link Posted: 8/27/2005 1:47:11 PM EDT
IIRC you can also BZ at the 25 yard line with either the 300 or 400 yard mark, but I can't recall. That's just to get it close when you go out to 100 though.
Link Posted: 8/27/2005 3:27:43 PM EDT
I think a 100 yard zero should be fine.
Link Posted: 8/27/2005 4:08:35 PM EDT
100 meters = 109.36132983377078 yards
Link Posted: 8/28/2005 8:06:23 AM EDT
What m24shooter said; you can BZ at 25 yards with the 300 meter line = zero@100m

It works out to about 1.6" low if you use the 100m line at 25 yards.
Link Posted: 9/4/2005 7:00:41 PM EDT

Originally Posted By Spooge5150:
100 meters = 109.36132983377078 yards



just shoot 9 yards back from the regular mark (if you can) and you should be good

Top Top