Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/16/2004 4:34:13 PM EST
And which ones do you use?
Link Posted: 9/16/2004 4:43:20 PM EST
I guess the bench rest is where I always zero for training.

But when the hell are you ever going to shoot from a bench in the real world? So if your checkweld is different on the bench, you may not get a perfect zero.
Link Posted: 9/17/2004 11:05:22 AM EST
I shoot NRA Highpower and regularly shoot load development and accuracy checks. I can shoot a 20-shot string or two from prone, but it's much less tiring using a benchrest and scope. I may shoot over 100 rounds when I'm doing full-blown load development. I use a Midway rest, which has fewer features and is lighter than would be used in benchrest competion, with a bunny-ear rear bag. Since benchresast isn't where I compete, a full-blown (expensive!!) setup is of no use to me. I need to know whether my rifle is shooting ~1/2 MOA at 300+ yards - I never try to get smaller than that. However, John Feamster was able to shoot an "official screamer" in bechrest competition - ~1/4" at 200 yards IIRC.
Link Posted: 9/17/2004 1:37:00 PM EST
I use my Harris bipod to zero in. I call it "real world" zeroing. :) I figure that is how I am going to use it anyways, so I might as well get my zero down accordingly.

Wes
Link Posted: 9/17/2004 1:46:48 PM EST
i use a sinclair bench rest. the best out there IMO
Remman
Link Posted: 9/17/2004 3:04:30 PM EST
I clicked without an option. None . If we are talking AR's here, I prefer to sight in with my elbos on a bench, rifle in my hands.
Bolt gun, My rimfires I enjoy shooting from a rest front, and body support rear. My varmint guns shot from a 9-13" Harris swivel collapsed to 9" and if using the bipod from the bench, I put a towel under the bipod and suck up the height.
Link Posted: 9/17/2004 3:05:36 PM EST
Loop sling
Link Posted: 9/17/2004 3:18:16 PM EST
Harris bi pod.
Link Posted: 9/17/2004 3:53:41 PM EST
Top Top