Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/27/2003 8:24:41 AM EST
Got an Oly PCR 5 and can't get the front sight pin down far enough (to bring the barrel up) to battlesight zero for 25 meters. The pin is all the way down but the rifle still shoots about 3" low. Any ideas, short of getting out a file and shadetree gunsmithing? How about the colored sight pins from places like CTD - are they shorter?

Link Posted: 6/27/2003 11:32:21 PM EST
Front sight post is screwed all the way down? Rear sight base is all the way down? Is it a standard front sight? Post height should be in the vicinity of .275". OAI makes a diff front sight (taller, made of drill rod) to be used with their det carry handle uppers. You'll know this one bc when the flange is flush with the top of the FSB the post will stick past the ears of the FSB. Possible they stuck one on your gun. If it's not something simple like the above and it's under warranty send it back to them.
Link Posted: 6/28/2003 5:04:07 AM EST
Thanks for the help Tweak, I'll see what Oly has to say.
Top Top