User Panel
User Panel
User Panel
|
Posted: 9/9/2010 4:35:16 PM EDT
Just wondering what would be the selling price on these items? I posted it on another thread, but I figured I would get more hits here.
-LMT 11.5" barrel w/ YHM phantom brake. I would say less than 500rnds down the pipe. -RRA Lower w/ JP single stage trigger. Also has a "rate reducing" buffer(I saw one on google, and it was almost $200  ...Info on these please if someone knows?) I would say 250rnds.
Also Young manufacturing complete BCG 100rnds total on this. 
Thanks in advance! |
|
|
|
Posted: 9/9/2010 4:38:39 PM EDT
[#1]
first things first...
LMT 11.5"? did you have it custom cut? edit: lower receiver without trigger - $220 trigger - $150 lower with the trigger - $350 BCG - $175 / $200 rate reducer - ? |
|
|
|
Posted: 9/9/2010 4:47:15 PM EDT
[#2]
The barrel had a 5.5" flash hider pinned on it originally.
|
|
|
|
Posted: 9/9/2010 4:55:30 PM EDT
[#3]
Was this an SBR?
|
|
|
|
Posted: 9/9/2010 5:03:50 PM EDT
[#4]
Can't say for sure on the barrel w/ some clarification since I've never heard of a 11.5" LMT, only 10.5".
Considering there are many low priced, quality lowers out there like Spikes for $250 complete, DSA for $210 complete etc. I'd say you should sell the trigger separately and buy a std FCG(trigger/hammer/springs) to install in the lower and sell it. The cheap DPMS pradus stock may turn some people off too. Lower w/ std FCG - $200 Trigger - $135 ($170 new) YM NM BCG - $160 ($195 new) Rate reducer - ??? |
|
|
|
Posted: 9/9/2010 5:04:16 PM EDT
[#5]
Quoted:
The barrel had a 5.5" flash hider pinned on it originally. factory LMT? i'm going to say that this is unlikely a factory LMT option and more than likely a custom job OR not an LMT barrel. do you have pics of the barrel markings? |
|
|
|
Posted: 9/9/2010 5:04:46 PM EDT
[#6]
Quoted:
Was this an SBR? Was what an SBR? |
|
|
|
Posted: 9/9/2010 5:05:18 PM EDT
[#7]
when did this tech forum become the "price my gun" forum?
|
|
|
|
Posted: 9/9/2010 5:06:24 PM EDT
[#8]
Quoted:
Quoted:
Was this an SBR? Was what an SBR? The lower |
|
|
|
Posted: 9/9/2010 5:41:00 PM EDT
[#9]
Quoted:
when did this tech forum become the "price my gun" forum? Half the crap in the forum isn't tech related. Hate to say it but showing off a new rifle that you bought has absolutley nothing to do with tech type stuff...yet half the posts here are just that. edit: I don't mind it being here. I think any question pertaining to AR's should be allowed to be posted. |
|
|
|
Posted: 9/9/2010 5:42:18 PM EDT
[#10]
The barrel was never on anything(Was gonna be used for a pistol project, but it never got there). It's a stripped barrel. The only stamping on it is a "Star" in the chamber. Total length w/ the phantom is 13-3/4"
|
|
|
|
Posted: 9/9/2010 5:45:59 PM EDT
[#11]
How is this the "tech" forum? This is labeled as and has always been followed as the AR-15 General Discussion forum and anything involving an AR should be welcome.
|
|
|
|
Posted: 9/9/2010 5:48:41 PM EDT
[#12]
I posted this in "Rifles, Uppers, Lowers, Barrels, and more" and got 0 reply's.
|
|
|
|
Posted: 9/9/2010 6:06:03 PM EDT
[#13]
Quoted:
Quoted:
when did this tech forum become the "price my gun" forum? Half the crap in the forum isn't tech related. Hate to say it but showing off a new rifle that you bought has absolutley nothing to do with tech type stuff...yet half the posts here are just that. i agree 1000% |
|
|
|
Posted: 9/9/2010 6:06:52 PM EDT
[#14]
Quoted:
How is this the "tech" forum? This is labeled as and has always been followed as the AR-15 General Discussion forum and anything involving an AR should be welcome. well the all mighty mods call it a tech forum everyday, so it is what it is. |
|
|
|
Posted: 9/9/2010 6:07:22 PM EDT
[#15]
Quoted:
The barrel had a 5.5" flash hider pinned on it originally. Quoted:
The barrel was never on anything(Was gonna be used for a pistol project, but it never got there). It's a stripped barrel. The only stamping on it is a "Star" in the chamber. Total length w/ the phantom is 13-3/4" didn't you say it had a 5.5" FH on it at one point? no markings on the barrel at all? did you but it new or used? i don't want to play 20 questions when i'm trying to help you price things so you can sell them. if you want a price on this barrel you should give me 100% of the information. pictures? |
|
|
|
Posted: 9/9/2010 6:53:34 PM EDT
[#16]
Quoted:
Quoted:
The barrel had a 5.5" flash hider pinned on it originally. Quoted:
The barrel was never on anything(Was gonna be used for a pistol project, but it never got there). It's a stripped barrel. The only stamping on it is a "Star" in the chamber. Total length w/ the phantom is 13-3/4" didn't you say it had a 5.5" FH on it at one point? no markings on the barrel at all? did you but it new or used? i don't want to play 20 questions when i'm trying to help you price things so you can sell them. if you want a price on this barrel you should give me 100% of the information. pictures? Ya, I said it "originally" had a pinned 5.5" FH on it. I bought it used also. The only marking is the star in the chamber. 
|
|
|
|
Posted: 9/9/2010 7:40:59 PM EDT
[#17]
According to the "LMT 1/9 twist barrel" thread and the response from Gene at LMT, the star in the chamber is a marking they use.
Email f rom Gene
We did make some special runs of these barrels. There should be a “star” or part of one stamped just inside the barrel extension on the face of the barrel. You probably bought the uppers from Denny or Kieslers. If you have any other questions or concerns, feel free to contact me via email or give me a call. Gene Swanson Technical Specialist Lewis Machine & Tool Co. 1305 West 11th Street Milan, IL 61264 Phone: 309.787.7151 Fax: 309.787.7193 Email: [email protected] However I still question this barrel being an actual LMT and not a barrel made by LMT for M&A to different specs because I'm pretty sure the 1/9 LMTs still had the usual barrel markings. |
|
|
|
Posted: 9/9/2010 7:54:21 PM EDT
[#18]
Quoted:
According to the "LMT 1/9 twist barrel" thread and the response from Gene at LMT, the star in the chamber is a marking they use. However I still question this barrel being an actual LMT and not a barrel made by LMT for M&A to different specs because I'm pretty sure the 1/9 LMTs still had the usual barrel markings. Thanks for the help.. So, what your saying is that it is/was a barrel blank so to speak made by LMT, but finished by another company? Or it's a LMT barrel, but not a LMT barrel....Huh? 
|
|
|
|
Posted: 9/9/2010 8:02:07 PM EDT
[#19]
Quoted:
Quoted:
According to the "LMT 1/9 twist barrel" thread and the response from Gene at LMT, the star in the chamber is a marking they use. However I still question this barrel being an actual LMT and not a barrel made by LMT for M&A to different specs because I'm pretty sure the 1/9 LMTs still had the usual barrel markings. Thanks for the help.. So, what your saying is that it is/was a barrel blank so to speak made by LMT, but finished by another company? Or it's a LMT barrel, but not a LMT barrel....Huh? More than likely the other way around... a Wilson blank finished by LMT. Wilson blanks aren't bad, they're run of the mill, so to speak. As for relative pricing, RRA would be comparable IMO. |
|
|
|
Posted: 9/9/2010 8:15:21 PM EDT
[#20]
Quoted:
Quoted:
Quoted:
According to the "LMT 1/9 twist barrel" thread and the response from Gene at LMT, the star in the chamber is a marking they use. However I still question this barrel being an actual LMT and not a barrel made by LMT for M&A to different specs because I'm pretty sure the 1/9 LMTs still had the usual barrel markings. Thanks for the help.. So, what your saying is that it is/was a barrel blank so to speak made by LMT, but finished by another company? Or it's a LMT barrel, but not a LMT barrel....Huh? More than likely the other way around... a Wilson blank finished by LMT. Wilson blanks aren't bad, they're run of the mill, so to speak. As for relative pricing, RRA would be comparable IMO. Alright...It sure woulda been nice if they stamped something else on it. Thanks again for the help. |
|
|
|
Posted: 9/10/2010 5:54:50 AM EDT
[#21]
Quoted:
Quoted:
Quoted:
Quoted:
According to the "LMT 1/9 twist barrel" thread and the response from Gene at LMT, the star in the chamber is a marking they use. However I still question this barrel being an actual LMT and not a barrel made by LMT for M&A to different specs because I'm pretty sure the 1/9 LMTs still had the usual barrel markings. Thanks for the help.. So, what your saying is that it is/was a barrel blank so to speak made by LMT, but finished by another company? Or it's a LMT barrel, but not a LMT barrel....Huh? More than likely the other way around... a Wilson blank finished by LMT. Wilson blanks aren't bad, they're run of the mill, so to speak. As for relative pricing, RRA would be comparable IMO. Alright...It sure woulda been nice if they stamped something else on it. Thanks again for the help. i'm with subbie on this one. not LMT but has maybe been through the LMT shop. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
