Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/24/2017 4:44:23 PM
11/22/2017 10:05:29 PM
Posted: 9/23/2004 1:50:01 PM EST
Should the safety be loose? It works fine and clicks on and off but just feels a little loose. Is this a problem or normal?
Thanks

Tony
Link Posted: 9/23/2004 9:15:37 PM EST
Link Posted: 9/24/2004 2:38:12 AM EST
It locks into fire and safe fine. How do I check the detent and the spring? I wonder if it even has a spring.Once it is in safe or fire the handle will move a bit. Doesn't feel like a spring is pressing on it. It is a colt trigger group and safety. Thanks for your time and help!
Link Posted: 9/24/2004 11:46:18 AM EST
The spring and detent are above the pistol grip. The spring is retained in the ejection side of the pistol grip, and the detent above it in the receiver. To get to both, you just need to remove the pistol grip via the bottom screw.

Take your time because when you pull the pistol grip, the detent will drop right out and can be easily lost.

Link Posted: 9/24/2004 8:56:28 PM EST
An old trick it to place a small ball bearing under the spring, (in the pistol grip) to space up the spring and increase tension on the safety detent.
Top Top