Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/22/2002 12:00:51 PM EST
Hello all,
I am in CA, and I bought a Fab-10. I am going to build a target/rangegun/plinker for fun, and I love the look of the SP1. Is the SP1 reasonably accurate, and will it fit onto my Fab-10? Thanks for the help
Austin.
Link Posted: 11/22/2002 3:24:39 PM EST
SP1 uppers have big pivot pins. You'll need an offset adapter pin to mount an SP1 upper on a FAB10
Link Posted: 11/23/2002 4:26:36 AM EST
SP1 uppers all all preban (f/s and lug) so you can't put them on a postban lower, but it's easy enough for a gunsmith to remove them, and either add a brake or remove the threads and recrown. I have found SP1 barrels to be very accurate with the 55 gr bullets they were designed to shoot.
Link Posted: 11/23/2002 9:44:20 AM EST
With a FAB-10, which has a fixed magazine, the AW ban does not apply.
Link Posted: 11/23/2002 5:10:25 PM EST
You're right. I forgot this is a Kalifrankengun.
Link Posted: 11/23/2002 6:50:37 PM EST
akscott60, Your best bet is to buy a C-7 upper and change out the hand guards to the A-1 style. The C-7 upper will have the brass deflector(a must for shooting left handed), yet still have the A-1 rear sight. Also, the C-7 upper will have the standard mil-spec take down holes, which will not require a conversion front pin to allow the upper to mate to your mil-spec take down pin lower. And, the finish on the C-7 upper will be closer to the correct color for your lower. Hope this helps.
Link Posted: 11/23/2002 11:46:42 PM EST
FYI Bushmaster's "A1 style" upper is the C7 configuration - field sights with a brass deflector and forward assist. I've used that bushmaster upper on a number of builds.
Link Posted: 11/24/2002 2:51:15 AM EST
Sorry i gotta ask this but im still learning about different Ar's,What does Sp1 stand for and whats the differance between a sp1 upper and a regular upper? -Thnx
Link Posted: 11/24/2002 9:51:40 AM EST
[Last Edit: 11/24/2002 9:53:17 AM EST by Big_Bear]
SP1 (Sporter 1) is Colt's civilian version of the M16. Produced from 1964 to 1985, the SP1 has a 1:12 twist chrome lined barrel, no forward assist or shell deflector, and triangular handguards. By "regular" upper, you probably mean the most widely used uppers these days, which would be A2, A3, A4, M4, and most recently, SPR (Special Purpose Rifle). All have round handguards, forward assist, shell deflectors, and 1:7 or 1:9 twist chrome lined barrels, except for the SPR with has a high quality match barrel and handguards with a rail mounting system. It's an animal all by itself. I probably left some stuff out but those are the basics. HTH
Link Posted: 11/24/2002 9:37:34 PM EST
Thanks for the help. I know that buying an SP-1 is like buying a 30 year old car, but I still cant help but to love the lines and feel of it. This first ar-15 purchase is SO hard. I still cant make up my dang mind. I need help...
Top Top