Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/2/2006 5:47:05 AM EST
What height do I get? Never scoped an AR before and I don't have any extra 30mm rings laying around.

HELP!
Link Posted: 3/2/2006 5:51:44 AM EST
Badger High or Super High depending on your preferred check weld.

Just for the sake of a visual:


Badger Super High, 50mm objective.
Link Posted: 3/2/2006 5:54:19 AM EST
[Last Edit: 3/2/2006 5:56:41 AM EST by mach6]

Originally Posted By DougL3NC:
What height do I get? Never scoped an AR before and I don't have any extra 30mm rings laying around.

HELP!



Don't believe you need high rings with the MR/T 3-9X36. Try the SEI MIL STD 1913 0.50" Med HD rings, NSN 1005-01-535-4423, P/N 7018. They are now being supplied for a good many military SPR's.
Depending on your handguard set up their 0.25" Low NSN 1005-01-535-4417 rings might be a tad too low for a flattop AR/M16.
Link Posted: 3/2/2006 6:53:29 AM EST
[Last Edit: 3/2/2006 9:10:37 AM EST by comp1911]
How about a LaRue SPR or equivilent mount?
Link Posted: 3/2/2006 6:54:33 AM EST
A 1.5 Larue SPR would serve you well. If you want more height from the upper, I'd get a 1.93 Larue SPR
Link Posted: 3/2/2006 7:08:25 AM EST

A 1.5 Larue SPR would serve you well.


Link Posted: 3/2/2006 7:17:18 AM EST
LaRue Tactical SPR Mount!!!


Link Posted: 3/2/2006 11:53:03 AM EST
Not to dissent, but my arms high 30mm qd's have worked well for the last 3 years...
Link Posted: 3/2/2006 11:58:13 AM EST

Originally Posted By 0612Devil:
Not to dissent, but my arms high 30mm qd's have worked well for the last 3 years...



they're fine rings unto themselves, certainly more than capable.
Link Posted: 3/2/2006 12:05:30 PM EST
Link Posted: 3/2/2006 12:59:57 PM EST


Larue mount is what I prefer for this scope, it just seems to look right and it works right.
Link Posted: 3/2/2006 1:18:28 PM EST
Depends on your budget and available rings at that moment. I wanted the LaRue SPR mount for my Leuplod Mk 4 3-9x36mm MR/T M3 but nobody had them at that moment when I was finishing my build, so I got ARMS "high" mounts to clear my Troy BUIS. The ARMS work great, but the LaRue will be replacing it soon enough....







Link Posted: 3/2/2006 2:49:33 PM EST
Found a set of Burris XTR High rings to try out....they were free, just have to go pick them up tomorrow. We'll see how it goes!

DL3
Top Top