Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 3/20/2006 3:05:15 PM EDT
I just got my Leupold Mark4 PR 3-9x40mm Mildot scope.... and I also got the Leupold QRW HIGH rings....


It mounted TOO LOW.... i had to push my cheek into my ACEFX stock until it HURTS before I can see the sight pic...

What rings do you guys use? And any rise rail?

I have a DPMS flat-top....
Link Posted: 3/20/2006 5:06:50 PM EDT
I also just ran into this problem. I ordered a leupold vxiii 4.5x14 30mm and the high leupold rings are much too low. I've seen a riser from gg & g that extends 2 inches over the handguard. It also raises the optics .500 so I think I could retain the purchased rings and help integrate a rear bius.

Any thoughts ?

Hope I'm not post robbing.......just had a similar concern
Link Posted: 3/20/2006 7:29:55 PM EDT
I had a similar set-up so I purchased risers from Bushmaster (http://www.bushmaster.com/shopping/bmas/yhm-226.asp). I think YHM also makes some good risers.

Have you ever tried the rings/risers from ARMS? I use the #22ARMS HIGH (http://www.armsmounts.com/catalog.php?action=124&item_id=83) on my M1A and it seems to work well for me.

Good luck!
Link Posted: 3/20/2006 8:49:33 PM EDT
Link Posted: 3/21/2006 7:51:33 AM EDT
Most people say a GG&G Scout Rail will work. I think so. I think all I need is another 1/2inch rise, then I'll be right there.

I found that YHM also have quality stuff, and their 227 scope rise has almost the same features as the GG&G Scout but almost 1/3 the price! So I guess, I'll try a YHM227 for like $30.... rather than going with the $82 GG&G Scout, unless anyone of you tell me that YHM227 is not a dependable item.
Link Posted: 3/21/2006 1:16:02 PM EDT
Top Top