Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/30/2004 5:23:53 PM EDT
[Last Edit: 9/30/2004 5:24:27 PM EDT by pdmcghinnis]
I just bought a new 16" A3 M4 upper from Model1Sales and really like it. Trouble is, I already have one and I've decided I would like a change.

Assuming I replace the FSB with a shaved gas block, is it possible to install a rifle length FF tube on the 16" barrel? If so, are there any special cinsiderations to keep in mind? I intend to place a flip-up FS on the top rail to go along with the rear ARMS 40.


If someone has done this, do you have any pics of the final product?
Link Posted: 9/30/2004 7:17:30 PM EDT
Sure, as long as the gas block fits under the tube, it's fine.

Link Posted: 9/30/2004 8:06:57 PM EDT
Link Posted: 9/30/2004 8:43:18 PM EDT
Hey, thanks for the help.

Any particular gas block/FF rail combos that just won't work together. Which combo of gas block and FF rail work best?
Link Posted: 9/30/2004 8:45:20 PM EDT
I recommend looking at the PRI low-pro gas block. Knights also makes one about 40% more expensive.

The 6.8SPC upper MSTN built for me has a mid-length gas system with the PRI gsa block under a full rifle-length PRI GenIII float tube.

-z
Link Posted: 10/2/2004 12:43:34 PM EDT


9mm RRA... FF is a little much, but I like it...
Link Posted: 10/2/2004 3:52:44 PM EDT
Link Posted: 10/2/2004 5:09:34 PM EDT

Originally Posted By JTAC_Supply:
Hey Spooky, what magwell adapter is that, and what mags does it use?

Jason



I don't know what block it is, but I believe it uses uncut Uzi mags.
Link Posted: 10/2/2004 5:38:26 PM EDT

Originally Posted By JTAC_Supply:
Hey Spooky, what magwell adapter is that, and what mags does it use?

Jason



Looks like a VM Hy-Tech.
Link Posted: 10/2/2004 7:20:29 PM EDT
[Last Edit: 10/2/2004 7:21:00 PM EDT by Spooky130]
Correct - it is a VM Hy Tech, and uses unmodified Uzi mags (IMI are golden, some others are a bit tight). Shoots pretty good but I'm thinking about putting an EoTech on it...

Spooky

U-dog has it's big brother a couple posts up!
Link Posted: 10/2/2004 7:42:20 PM EDT
There is a thred floating around that states it is hard (not ipossible) to use the LaRue rifle length tube, b/c you can't do the gas system first.
Link Posted: 10/2/2004 7:46:40 PM EDT
I can tell you that Using a SPR type block requires a bit of clearence work on the bolck to clear the DD tube,...
Spook I just noticed the Green! looks good
Link Posted: 10/2/2004 7:50:41 PM EDT
Top Top