Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/3/2006 11:35:16 AM EST
Hi gang, I have a CMT A4 upper that has a couple of slings attachement points on. One is clamped on the barrel inside the FSB. See pic below. It appears to be held by a pin, and I wanted to know if I can remove it without issue. I use an IDF 2 point sling with the para cord attached to the FSB so I really do not need this part. As always, thanks for the responses....mack

Link Posted: 1/3/2006 11:41:15 AM EST
I forget what size punch I used. Find the right one and hammer the rivet through.
Link Posted: 1/3/2006 3:30:29 PM EST
The side-sling adapter is held on by a roll pin on the right side of the FSB. Just tap it out with a hammer and punch.

The factory under-barrel sling swivel can be removed by drilling out the rivet.
Link Posted: 1/4/2006 5:00:42 AM EST
punch it out, worked for all my guns
Link Posted: 1/4/2006 5:24:14 AM EST
Thanks guys...I figgered as much but wanted to be dead on sure before popping it off.
Link Posted: 1/4/2006 7:28:48 AM EST
or you could use a drill with a slightly oversized drill bit
Top Top