Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/28/2003 5:51:55 AM EST
Hi Gang,

I'm going to remove the fake flash hider on my RRA carbine. I was wondering what the hot tips and cool tricks to doing this were. I understand that it's pressed on, and that un-pressing it may be somewhat more involved. I'm not a machinest, but I play one at work, so equipment/tooling shouldn't be a problem. Thanks for your time, and have a nice day.

Stych
Link Posted: 10/28/2003 6:00:38 AM EST
Link Posted: 10/28/2003 6:22:08 AM EST
While the FFH can be removed, be aware that the muzzle has been turned down too far to thread it for a regular FH or brake.
Link Posted: 10/28/2003 2:14:06 PM EST
Link Posted: 10/29/2003 4:12:38 AM EST
Thanks for all the input. Removing the fake flash hider is priority #1. As to wheather or not a brake can be readily installed, I'll burn that bridge when I get to it. Stych
Link Posted: 10/29/2003 12:58:21 PM EST
If it can't be rethreaded to attach a FF (post-sunset) or a brake, why remove it at all? It hepls protect the crown of the barrel, and it actually looks decent IMO!? I have the same barrel, and if the ban sunsets I'll just buy a new upper with all the goodies. Just food for thought... B9
Link Posted: 10/29/2003 2:50:54 PM EST
Link Posted: 10/29/2003 4:46:49 PM EST
Why remove it? To install a FF RAS, of course. Thanks again, Stych
Link Posted: 10/30/2003 9:10:56 AM EST
Originally Posted By TheRicker:
Originally Posted By notack: While the FFH can be removed, be aware that the muzzle has been turned down too far to thread it for a regular FH or brake.
View Quote
Not exactly true. I had it done to mine.
View Quote
Okay, on [b]my[/b] RRA barrel, I found that when I removed the FFH, tthe muzzle was too small to be threaded for a normal FH. So I sold it.
Top Top