Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 12/14/2005 6:35:26 AM EST
I have a RRA 9mm Complete Rifle on order. I have 3# Jard Triggers in my other AR's that are working out nicely.

I was wondering what my options were for trigger enhancements...my research shows that the 9mm bolt could complicate things with the Jard arrangement.

Ideas/suggestions?

Thanks in advance,

CZ52'
Link Posted: 12/14/2005 7:32:37 AM EST
[Last Edit: 12/14/2005 7:34:11 AM EST by joe1972]
Ramp your bolt!
9MM are very dirty, you will get crap all over the FCG, and this might cause problems for your trigger if not kept very clean.
I was using a Bushy A2 Lower with my ASA 9MM upper for awhile, not a problem after I ramped my Bolt. Now I use a RRA Lower with STD trigger and 6 Pos. stock, still no problems.
Trigger choice is yours, just keep it clean...
Link Posted: 12/14/2005 7:34:48 AM EST
JP trigger will work with the Rock River 9mm hammer. I called JP to confirm this.
Link Posted: 12/14/2005 9:14:02 AM EST
Thanks for the replies!!

re: 9mm AR Hygene (sp?), understood...I'm fairly "religious" with that anyway, and I enjoy the cleaning process in "the cave".

re: Bolt Ramping, from the Sticky, I got the understanding this was needed for FA but not Semi', did I misunderstand?

re: JP Trigger, I was looking at that...do you use the JP Hammer Spring or the RRA 9mm Hammer Spring?

Thanks,

CZ52'
Link Posted: 12/14/2005 9:24:04 AM EST
[Last Edit: 12/14/2005 9:53:33 AM EST by Duskykiller]
I would use the JP springs on a 9MM. If you have any questions I suggest you contact them they are good to deal with.
Link Posted: 12/14/2005 9:45:50 AM EST
Thanks, I'll get in touch with JP.
Link Posted: 12/14/2005 11:43:41 AM EST
[Last Edit: 12/14/2005 11:44:16 AM EST by joe1972]
Ramp your bolt!
Look up Joe Blacks site, it explains why!
Very easy to do yourself, I will post my Pictures one of these days...
Link Posted: 12/19/2005 2:10:00 PM EST
$10 for JP yellow spring kit and that is all U need.
Link Posted: 12/19/2005 5:19:05 PM EST
Sent my bolt to Joe Black (out on Mod back by Fri.). Highly recommended. This is on a 9mm RRA. I also changed the srpings to yellows. Trigger is smooth and light.
Link Posted: 12/20/2005 5:20:08 AM EST

Originally Posted By CZ52GUY:
Thanks for the replies!!

re: 9mm AR Hygene (sp?), understood...I'm fairly "religious" with that anyway, and I enjoy the cleaning process in "the cave".

Thanks,

CZ52'



i have found that the 9mm will crud itself up way before i finish shooting it. i go through about 500rds at a time and it gets messy in there.


also running the hp yellow springs in my 9mm carbine.
Link Posted: 12/20/2005 1:07:36 PM EST
How can I get ahold of Joe Black?
Link Posted: 12/21/2005 4:12:31 AM EST
email

m60joe@m60joe.com
Link Posted: 12/21/2005 4:55:20 AM EST

Originally Posted By TURRICAN:
How can I get ahold of Joe Black?



m60joe.com/

Top Top