Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 9/10/2010 9:46:49 AM EST
I am trying to remove this black aluminium trigger guard pin on this lmt lower...

The pin looks a lil mushed and i got this lower off of a trade, so i didnt do the work myself on it...


So I be trying to tap this thing out right to left.. or left to right?

Any suggestions on a mushed pin? Tips tricks? Id really prefer NOT to bust the ears off this thing so I figured I should double check before i start banging away...
Link Posted: 9/10/2010 9:52:21 AM EST
[Last Edit: 9/10/2010 9:52:43 AM EST by reign719]
Are both ends smashed up?

I would take the roll pin punch to the side that isn't messed up, or the least messed up.

Link Posted: 9/10/2010 9:52:46 AM EST
It's a straight roll pin. If one side is mushed, that's probably the side it was knocked in from, so knocking it out from the other side might be a little easier... It should come out either way though.

Support the trigger guard ears with a block of wood. Drill a hole though it, for the pin to be able to drop into, and hammer it out. It's that simple.
Link Posted: 9/10/2010 10:17:10 AM EST
Be careful. As stated above very carefully and solidly support the down-side of the receiver while pounding the guard pin out. Failing to do so will result in a broken receiver. Same thing going back together.
Link Posted: 9/10/2010 10:28:29 AM EST
Fair enough,

After thinking a bit more on it ill wait until next week to do this, I want to order some new roll pins because i dont want to put back in this pin if its all mashed up...

Im just swapping trigger guards from 1 lower to another for color matching purposes :P

Thanks for the tips!
Link Posted: 9/14/2010 3:08:04 PM EST
Yeah, be careful. I broke my mega lower installing one.
Top Top