Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 8/31/2004 7:56:47 PM EST
I have a FIRSH being installed on one of my AR's. Which vertical foregrips work best with the FIRSH system? I know certain grips work better with certain rails and I was trying to decide which one to order. I have an AAC foregrip on my carbine, but it was too tight for the FIRSH.

Any suggestions???
Link Posted: 9/1/2004 7:54:53 AM EST
Any of them should work, I can see no reason why your other FG wouldn't. If it was tight, try a little lube and tapping it on.
Link Posted: 9/1/2004 8:50:25 AM EST
The KAC vertical foregrip works fine. Just crank down on the tightening knob and the grip won't go anywhere, as long as you're not using your rifle as a stilt.
Link Posted: 9/1/2004 9:08:02 AM EST
the first samco one is too lose. and the kinght one has to be tightened down too much(you tighten it with the bottom knob) i think the best one for the firsh will have 2 allen screws to mount it.
Link Posted: 9/1/2004 9:14:24 AM EST
I must have missed this problem with the ones I've used.
Link Posted: 9/1/2004 9:19:08 AM EST
[Last Edit: 9/1/2004 9:20:00 AM EST by DaPhotoGuy]


This is the straight broomhandle by Falcon Industries. It will fit ANY picatinny rail. Here it is on my FIRSH. Has a storage compartment for extra batteries.
Link Posted: 9/1/2004 9:23:34 AM EST
[Last Edit: 9/1/2004 9:24:13 AM EST by G-CODE]
I like the TDI short forgrip on my firsh and my AK.



TDI ARMS
Link Posted: 9/1/2004 10:37:07 AM EST

Originally Posted By DaPhotoGuy:
members.cox.net/daphotoguy/AR15_CQB.jpg

This is the straight broomhandle by Falcon Industries. It will fit ANY picatinny rail. Here it is on my FIRSH. Has a storage compartment for extra batteries.



If that is your pic, it is outstanding.
Link Posted: 9/2/2004 5:08:49 AM EST

Originally Posted By Stickman:

Originally Posted By DaPhotoGuy:
members.cox.net/daphotoguy/AR15_CQB.jpg

This is the straight broomhandle by Falcon Industries. It will fit ANY picatinny rail. Here it is on my FIRSH. Has a storage compartment for extra batteries.



If that is your pic, it is outstanding.



Thanks, that is mine. The only thing I would like to change about my AR is to flute the bull barrel or spend the $$ for a super light barrel. The fluting would be the cheaper of the two so that is probably the way I'll go. I've seen lots of pictures of fluted hbars but rarely any of fluted bulls.
Link Posted: 9/2/2004 7:07:04 AM EST
Done with computer, or effective lighting?
Link Posted: 9/2/2004 10:02:13 AM EST
Both. I proped the AR up on a small cardboard box so I had to digitize that away but most of the white you see is just white background paper.
Link Posted: 9/2/2004 12:34:48 PM EST

Originally Posted By DaPhotoGuy:
members.cox.net/daphotoguy/AR15_CQB.jpg

This is the straight broomhandle by Falcon Industries. It will fit ANY picatinny rail. Here it is on my FIRSH. Has a storage compartment for extra batteries.



Is that gasblock set-up a ZM product?

sweet rifle ...oughta be proud of her
Link Posted: 9/2/2004 1:03:49 PM EST
The ones from Bushmaster work well too.
Top Top