Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/11/2002 8:51:47 AM EST
Have some LC XM193 that is great but less than pretty. I know you wouldn't want to polish this in a Tumbler type of machine but is it ok to do in a vibrator type?

Looks like the firing pin in an AR does alot more during chambering than loaded ammo could ever go through swimming around in some corncob in a vibrator type polisher.

Only thing I can think of would be static but not sure if that could be a problem.

TIA for any advice
Link Posted: 10/11/2002 8:58:26 AM EST
[Last Edit: 10/11/2002 9:00:36 AM EST by mr_wilson]
Question has been asked several times and if I recall correctly answer was: not a good idea.

Believe something to effect of "tumbling loaded ammo might caused the powder granules to break-up leading to possible over-pressure problems".

Mike

PS - If you want it shiny, get yourself some FLITZ and an old tee-shirt and polish'em by hand while setting around watching the TV.
Link Posted: 10/11/2002 9:11:13 AM EST
[Last Edit: 10/11/2002 9:11:58 AM EST by Minuteman419]
Hello. I use some stuff called Never Dull Magic Wadding Polish. It works really good for me.
MM419
Link Posted: 10/11/2002 10:56:56 AM EST
Link Posted: 10/11/2002 3:38:51 PM EST
I have heard the recommondations against tumbling before and decided to try it for myself. I tumbled some XM193 for about an hour; checked the powder for any differences, and found none at all. It is still up to you in the end, but I don't think you will have any problems.
Top Top