Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 10/29/2013 5:58:05 PM EST
[Last Edit: 10/29/2013 6:02:07 PM EST by uscgnaveng]
Below are a plastic or nylon trigger and hammer. Any idea of what they are used for? Some type of armorers test parts? Any thoughts would be appreciated.

http://i1291.photobucket.com/albums/b556/uscgnaveng/photo2_zps560f80df.jpg
Link Posted: 10/29/2013 5:59:02 PM EST
[Last Edit: 10/29/2013 6:18:25 PM EST by Medicfrost]
Probably off a plastic lower Nevermind, pics now showing. Definitely not off a lower. Looks like molds
Link Posted: 10/29/2013 6:03:04 PM EST
MIM mold forms
Link Posted: 10/29/2013 6:05:52 PM EST
[Last Edit: 10/29/2013 6:06:53 PM EST by williewvr]
Looks like mold blanks. When you mold parts the mold is made around a wax part, the wax is then melted out and replaced with molten metal. These area to be the forms for making the original castEdit will be taking a typing lesson to see if I can speed the frig up
Link Posted: 10/29/2013 6:09:38 PM EST
Got these in a box of demil M16 parts. Any idea of collectability or value?
Link Posted: 10/29/2013 6:44:56 PM EST
Don't use these parts, You will eventually be unhappy with the results,
Link Posted: 10/29/2013 6:56:33 PM EST
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Russ4777:
Don't use these parts, You will eventually be unhappy with the results,
View Quote


Link Posted: 10/29/2013 6:58:07 PM EST
They almost look like they are 3D Printed. Someone test fitting parts?

MAHA
Link Posted: 10/29/2013 7:10:20 PM EST
Originally Posted By uscgnaveng:
Below are a plastic or nylon trigger and hammer. Any idea of what they are used for? Some type of armorers test parts? Any thoughts would be appreciated.

http://i1291.photobucket.com/albums/b556/uscgnaveng/photo2_zps560f80df.jpg
View Quote


At first, I thought you were referring to the plastic trigger and hammer that are installed in polymer lowers.....

Those are almost as useless.
Top Top