Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/22/2005 5:45:00 PM EST
[Last Edit: 12/22/2005 5:45:00 PM EST by 82ndAbn]
I've got a question on the ACE pistol buffer tube kit. Can I use a standard ambi. sling plate on this setup or do I have to use the ACE plate setup?
Link Posted: 12/22/2005 6:26:11 PM EST
Link Posted: 12/22/2005 7:00:24 PM EST
I scored a couple of pistol buffer tubes from RB Precision. $25 each. They are carbine length entry stock tubes but they have a longer threaded front end. You can put an ambi plate on the tube and it will be long enough to catch the buffer retaining pin! The but end of the tube is not threaded so you cant install the stock screw. They work great. All you have to do is take a dremel tool to the ambi plates notch and remove a little material. The plate notch is there to slide in the groove in the retracting stock tube and it wont fit over the threads. No big deal. R B Precision also sells the ambi plates and foam pads. Look here, Equipment Exchange • AR15 Parts - New - Lower Receiver • AR15 Pistol buffer tubes $20.00 in stock now, uses car spring and buffer
Link Posted: 12/22/2005 7:38:03 PM EST
Thanks for the info.
Link Posted: 12/23/2005 12:12:20 AM EST
Poll added
Link Posted: 12/23/2005 1:59:48 PM EST
Link Posted: 12/26/2005 10:33:37 AM EST
ummm.... have you called ACE and asked them?

Top Top