Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/21/2006 9:25:16 PM EST
[Last Edit: 3/7/2006 10:54:54 AM EST by inferno715]
LCW OD lower
RRA hammer and buffer
KNS pins
Hahn dedicated block
Vltor stock
TD grip
YHM single pt sling adapter (also have a Troy Ind sling for it)

Link Posted: 2/22/2006 1:25:13 AM EST
Cool, do all HAHN blocks come with the feed ramps like that?
Link Posted: 2/22/2006 2:30:59 AM EST
looks great to this point. Cant wait to is it compleat
Link Posted: 2/22/2006 3:25:36 AM EST
I had a problem with the ejector on my hahn block you should be aware of. The ejector was wobbling a bit in the mag block slot and would miss the edge of the spent case during extraction causing failures to eject. I took the block apart and shimmed the left side of the ejector to push it as far right as possible while making it tight. I then bent the ejector further to the right so it just clears the bolt while riding in the bolt slot (RRA upper).
Link Posted: 2/22/2006 8:30:44 AM EST

Originally Posted By MoNkEyTurbo:
Cool, do all HAHN blocks come with the feed ramps like that?

Yep. You do get what you pay for. Hahn blocks cost a bit more than say a RRA block, but in my opinion they are definitely worth it.
Link Posted: 3/7/2006 10:55:19 AM EST
RRA upper.

Top Top