Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/6/2006 12:37:08 AM EST
I want to order a 30mm scope mount for my Bushmaster M4 and I see the mounts can be had in either Weaver or Picatinny ..... Which do I get? I thought both rail systems would take the same scope mounts.
Link Posted: 3/6/2006 3:47:58 AM EST
Link Posted: 3/6/2006 12:51:01 PM EST
Thanks Grant.
Link Posted: 3/18/2006 4:07:34 PM EST
My mount moved

I put a Burris picatinny mount on my flat top. I tightened it up as tight as I thought I should but noticed after the first range trip the mount had slid backwards. It has about 1/16" fore & aft movement.

The instructions say to tighten the nut between 65 - 100 inch pounds Is that excessive? I can borrow a torque wrench at work if need be.
Link Posted: 3/19/2006 2:47:13 AM EST
65 is standard
Link Posted: 3/19/2006 6:21:50 AM EST
Got it... Thanks VTDefender.
Top Top