Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 9/22/2004 5:24:09 PM EDT
Anybody got pictures of a 14.5" barrel with a flash hider bringing it to 16", with a rifle-length float tube / rail?

Is there enough room for a suppressor on there?

Link Posted: 9/23/2004 3:49:07 AM EDT
Betcha there's one of what your looking for in here, or the older thread: www.ar15.com/forums/topic.html?b=3&f=118&t=201315

Link Posted: 9/23/2004 5:59:02 AM EDT
Link Posted: 9/23/2004 8:17:32 AM EDT

That's exactly what I needed to see. Looks like plenty of room for a 'can over a bilock.

Link Posted: 9/23/2004 8:21:16 AM EDT
here's my 14.5 with Bi-Lock with my TPR-S mounted...brasspile on the trigger:
Link Posted: 9/23/2004 10:53:02 PM EDT
It looks like the rifle MRP foreend is about 0.5" longer than regular fore-ends. This complicates matters.
Link Posted: 9/24/2004 1:50:19 AM EDT
With an MRP, you just might be the first:

Link Posted: 9/24/2004 2:01:25 AM EDT
I have a 16" MRP - from the length that it protrudes from the rifle length chassis I woudl guess that the 14.5 would not work with a can.

As Wes... He likely has a rifle lenght MRP and a 14.5" bbl lying around
Link Posted: 9/24/2004 2:46:16 AM EDT
[Last Edit: 9/24/2004 2:58:11 AM EDT by Capn_Crunch]
Check out CL Tactical in the gallery section. Chen has a 14.5" rifle length MRP.


I hope Chen doesn't mind the bandwidth theft...

Link Posted: 9/24/2004 3:06:36 AM EDT

Originally Posted By Capn_Crunch:
I hope Chen doesn't mind the bandwidth theft...

Thief (maybe NSFW)
Link Posted: 9/24/2004 4:01:43 AM EDT
LMFAO! That's destined to be a classic

Link Posted: 9/24/2004 5:03:13 AM EDT
Sure that a 14.5?

Looks a lot like my 16" does (I could be wrong my 16" is several miles away and lonely)

Link Posted: 9/24/2004 7:35:37 AM EDT
I just got off the phone with Phil @ Gemtech.

I need about 0.30" behind the barrel shoulder to mount a M4-96D.

Even on Chen's, it looks like there's about 3/4th an inch behind the rear of the Vortex.

Link Posted: 9/24/2004 7:45:10 AM EDT
Kev, it's a 14.5". The 16"ers are just a wee bit longer than that.

Link Posted: 9/25/2004 7:04:19 AM EDT
Roger that

Good to know
Link Posted: 9/25/2004 10:32:01 AM EDT
Capn Crunch what type of Upper is that and where can I find one? I want that exact configuration.
Link Posted: 9/25/2004 6:29:23 PM EDT
That's an LMT MRP(monolithic rail platform)

a nice one at that
Top Top