User Panel
User Panel
User Panel
|
Posted: 7/18/2023 12:54:14 PM EST
[#1]
Quote HistoryOriginally Posted By YontiLink: Get a large clamp and with the rifle assembled clamp the gusset into the lower with the other jaw of the clamp on the magwell. Tighten down the hex bolt while it’s clamped. The wobble is from the gusset not being tight to the lower, not from the hex bolt being loose. My gusset is tight to the lower, the hex bolt is incredibly tight, and the stock still has wobble. |
|
|
|
|
Posted: 7/18/2023 1:02:39 PM EST
[#2]
Wobble is clone correct
|
|
|
|
|
Posted: 7/18/2023 5:09:10 PM EST
[Last Edit: HaveBlue83]
[#3]
Quote HistoryOriginally Posted By prskiller: Wobble is clone correct I always pulled the stock the the rear, pushed the gusset forward and then tightened it down. And locktited it. |
|
|
|
WA, USA
|
Posted: 7/19/2023 12:17:41 AM EST
[#4]
Quote HistoryOriginally Posted By HaveBlue83: 5rh group guy posted this in the main mk12 thread, but this is all H content...... @ShakespeareWhip this is the guy that did the arca mating plate for me  
|
|
|
|
Posted: 7/19/2023 1:37:42 AM EST
[#5]
Quote HistoryOriginally Posted By HaveBlue83: Like I said....the H stock is craptastic. Mine always have shot loose. They say use Teflon tape.... I always pulled the stock the the rear, pushed the gusset forward and then tightened it down. And locktited it. I just removed my original which is rifle length and put the carbine copy in its place. Both wobble the same, tight as can be but I’m not bothered one bit.. Clone world |
|
|
|
|
Posted: 7/19/2023 8:41:53 AM EST
[#6]
Quote HistoryOriginally Posted By HaveBlue83: Like I said....the H stock is craptastic. Mine always have shot loose. They say use Teflon tape.... I always pulled the stock the the rear, pushed the gusset forward and then tightened it down. And locktited it. Quote HistoryOriginally Posted By HaveBlue83: Originally Posted By prskiller: Wobble is clone correct I always pulled the stock the the rear, pushed the gusset forward and then tightened it down. And locktited it. You put Locktite (blue/242, I presume?) on the tube threads, or the cross bolt that tightens the gusset? Or both? |
|
|
|
|
Posted: 7/19/2023 9:30:30 AM EST
[#7]
Quote HistoryOriginally Posted By towerofpower94: You put Locktite (blue/242, I presume?) on the tube threads, or the cross bolt that tightens the gusset? Or both? I love the stock either way. It's the H |
|
|
|
|
Posted: 7/19/2023 9:57:26 AM EST
[#8]
Quote HistoryOriginally Posted By HaveBlue83: I just keep tightening it every 6 months lol. There was no solution unless I put like pipe dope on it and tried to lock it on lol I love the stock either way. It's the H Quote HistoryOriginally Posted By HaveBlue83: Originally Posted By towerofpower94: You put Locktite (blue/242, I presume?) on the tube threads, or the cross bolt that tightens the gusset? Or both? I love the stock either way. It's the H Rog. I'll probably give it a go sans any tape or 242 and then add teflon tape one layer at a time until I get a snug fit. I'll also 242 the crossbolt in the gusset once the stock isn't wobbly I don't seem to swap bits around on rifles like some in the Mk 12 threads do, so I'm down to make things a little more semi-permanent. |
|
|
|
|
Posted: 7/25/2023 1:55:03 PM EST
[#9]
|
|
|
|
|
Posted: 7/26/2023 1:03:11 PM EST
[Last Edit: towerofpower94]
[#10]
Got the blem H&R M16A1 lower with the new Ace stock and ERGO grip put together last night.
 Attached FileJust need some ARMS 22Ms (with the HaveBlue LS treatment) and the H upper. Will eventually put a G SSA FCG in there too, but probably wait for BF or a blem sale for the upper and SSA. Thoroughbred Armament still the cheapest place for a 1:7 twist H upper in black or FDE? With their code it’s a bit under $1500 all in while PRI and Midway float around $1575+ with shipping. |
|
|
|
|
Posted: 7/29/2023 3:35:08 PM EST
[#11]
|
|
|
|
|
Posted: 7/29/2023 4:00:57 PM EST
[#12]
Quote HistoryOriginally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG That optic looks good on there |
|
|
|
|
Posted: 7/29/2023 5:12:29 PM EST
[#13]
Quote HistoryOriginally Posted By Three0h8: That optic looks good on there Quote HistoryOriginally Posted By Three0h8: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG That optic looks good on there Looks better with paint.
|
|
|
|
|
Posted: 7/29/2023 6:50:40 PM EST
[#14]
Quote HistoryOriginally Posted By SecretSquirell: Looks better with paint. Quote HistoryOriginally Posted By SecretSquirell: Originally Posted By Three0h8: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG That optic looks good on there Looks better with paint. I just got it mounted 
|
|
|
|
|
Posted: 7/29/2023 7:31:32 PM EST
[#15]
Quote HistoryOriginally Posted By UndrGrndPrdcts: I just got it mounted Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By SecretSquirell: Originally Posted By Three0h8: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG That optic looks good on there Looks better with paint. I just got it mounted What's the max effective range of an excuse?
|
|
|
|
|
Posted: 7/29/2023 7:58:46 PM EST
[Last Edit: towerofpower94]
[#16]
Quote HistoryOriginally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. |
|
|
|
|
Posted: 7/29/2023 10:01:40 PM EST
[#17]
Quote HistoryOriginally Posted By towerofpower94: One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Quote HistoryOriginally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. |
|
|
|
|
Posted: 7/29/2023 10:45:57 PM EST
[#18]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Nope mk5 3.6-18 in a spuhr. Not even tano :/ |
|
|
|
|
Posted: 7/30/2023 5:06:18 AM EST
[#19]
Quote HistoryOriginally Posted By wissota4: Not even tano :/ Quote HistoryOriginally Posted By wissota4: Originally Posted By UndrGrndPrdcts: Nope mk5 3.6-18 in a spuhr. Not even tano :/ I know right 
|
|
|
|
|
Posted: 7/30/2023 3:33:55 PM EST
[#20]
Quote HistoryOriginally Posted By UndrGrndPrdcts: I know right Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By wissota4: Originally Posted By UndrGrndPrdcts: Nope mk5 3.6-18 in a spuhr. Not even tano :/ I know right He's so poor he can't even afford paint 
|
|
|
|
UT, USA
|
Posted: 7/30/2023 4:02:48 PM EST
[Last Edit: Whiskey1Alpha]
[#21]
Anyone looking for the elusive Bushnell SMRS 1-8 in the correct OBR mount?
|
|
|
|
Posted: 7/30/2023 4:29:15 PM EST
[#22]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Nope mk5 3.6-18 in a spuhr. Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? |
|
|
|
|
Posted: 7/30/2023 4:56:13 PM EST
[#23]
Quote HistoryOriginally Posted By towerofpower94: Ah, cloning one of the recent sniper comp guns? Quote HistoryOriginally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. |
|
|
|
|
Posted: 7/30/2023 5:40:21 PM EST
[#24]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Do you notice the weight? 26oz is def more. I kinda would like to try one. Idc if it's black, I'd want moa reticle anyways and I'm sure the tannos are mil/mil. I'd just paint the shit out of it lol. |
|
|
|
|
Posted: 7/30/2023 5:46:18 PM EST
[Last Edit: metalsaber]
[#25]
Quote HistoryOriginally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG Caught this still out of the corner of my gopro. again sick build.  |
|
|
|
|
Posted: 7/30/2023 5:47:38 PM EST
[#26]
Quote HistoryOriginally Posted By HaveBlue83: Do you notice the weight? 26oz is def more. I kinda would like to try one. Idc if it's black, I'd want moa reticle anyways and I'm sure the tannos are mil/mil. I'd just paint the shit out of it lol. Quote HistoryOriginally Posted By HaveBlue83: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Do you notice the weight? 26oz is def more. I kinda would like to try one. Idc if it's black, I'd want moa reticle anyways and I'm sure the tannos are mil/mil. I'd just paint the shit out of it lol. I got to feel the gun after the match and the gun doesn't seem that heavy. |
|
|
|
|
Posted: 7/30/2023 6:49:44 PM EST
[Last Edit: towerofpower94]
[#27]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Very cool. Which DMR match did you shoot today? Which range was it at and what kind of target sizes/presentations/props did they have you guys using? I’m in NoVA, but regularly drive to WV to shoot at PNTC and Shadow Hawk. Would happily add another WV range to the rotation if it’s not too far and the matches are fun/challenging. |
|
|
|
|
Posted: 7/30/2023 7:09:33 PM EST
[#28]
Quote HistoryOriginally Posted By metalsaber: I got to feel the gun after the match and the gun doesn't seem that heavy. Quote HistoryOriginally Posted By metalsaber: Originally Posted By HaveBlue83: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Do you notice the weight? 26oz is def more. I kinda would like to try one. Idc if it's black, I'd want moa reticle anyways and I'm sure the tannos are mil/mil. I'd just paint the shit out of it lol. I got to feel the gun after the match and the gun doesn't seem that heavy. Yea I really don't find it heavy at all. Perfect weight for medium distance engagements. |
|
|
|
|
Posted: 7/30/2023 7:11:27 PM EST
[#29]
Quote HistoryOriginally Posted By towerofpower94: Very cool. Which DMR match did you shoot today? Which range was it at and what kind of target sizes/presentations/props did they have you guys using? I’m in NoVA, but regularly drive to WV to shoot at PNTC and Shadow Hawk. Would happily add another WV range to the rotation if it’s not too far and the matches are fun/challenging. Quote HistoryOriginally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Very cool. Which DMR match did you shoot today? Which range was it at and what kind of target sizes/presentations/props did they have you guys using? I’m in NoVA, but regularly drive to WV to shoot at PNTC and Shadow Hawk. Would happily add another WV range to the rotation if it’s not too far and the matches are fun/challenging. Rosedale in Pittsburgh. It only goes out to about 300ish but some of the targets are very small. Was a great match, can't wait to go back. |
|
|
|
|
Posted: 7/30/2023 8:01:59 PM EST
[#30]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Rosedale in Pittsburgh. It only goes out to about 300ish but some of the targets are very small. Was a great match, can't wait to go back. Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Very cool. Which DMR match did you shoot today? Which range was it at and what kind of target sizes/presentations/props did they have you guys using? I’m in NoVA, but regularly drive to WV to shoot at PNTC and Shadow Hawk. Would happily add another WV range to the rotation if it’s not too far and the matches are fun/challenging. Rosedale in Pittsburgh. It only goes out to about 300ish but some of the targets are very small. Was a great match, can't wait to go back. Thanks. Nearly 5hrs for me, which might be a bit too long of a haul for a one day match, haha. |
|
|
|
|
Posted: 7/30/2023 8:25:50 PM EST
[#31]
Quote HistoryOriginally Posted By towerofpower94: Thanks. Nearly 5hrs for me, which might be a bit too long of a haul for a one day match, haha. Quote HistoryOriginally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. Ah, cloning one of the recent sniper comp guns? Kinda more like the one Shakespearewhip posted. But using the mk5 since they have been used on several mk12s. It fits this gun well. Worked perfect at the dmr match today. Very cool. Which DMR match did you shoot today? Which range was it at and what kind of target sizes/presentations/props did they have you guys using? I’m in NoVA, but regularly drive to WV to shoot at PNTC and Shadow Hawk. Would happily add another WV range to the rotation if it’s not too far and the matches are fun/challenging. Rosedale in Pittsburgh. It only goes out to about 300ish but some of the targets are very small. Was a great match, can't wait to go back. Thanks. Nearly 5hrs for me, which might be a bit too long of a haul for a one day match, haha. Yea I wouldn't drive that far. At least you have other options closer to you. |
|
|
|
|
Posted: 8/7/2023 2:53:38 PM EST
[#32]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Nope mk5 3.6-18 in a spuhr. Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. @UndrGrndPrdcts What height spuhr is that? |
|
|
|
|
Posted: 8/7/2023 2:54:47 PM EST
[#33]
Quote HistoryOriginally Posted By Duck_Hunt: @UndrGrndPrdcts What height spuhr is that? Quote HistoryOriginally Posted By Duck_Hunt: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. @UndrGrndPrdcts What height spuhr is that? 1.18", SP-5001 |
|
|
|
|
Posted: 8/8/2023 1:13:57 PM EST
[#34]
Quote HistoryOriginally Posted By UndrGrndPrdcts: 1.18", SP-5001 Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By Duck_Hunt: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. @UndrGrndPrdcts What height spuhr is that? 1.18", SP-5001 Nice! That’s what I was thinking. Just bought a Atacr 4-16x42 to freshen up the mod 0 and was looking at mounts. Seems the 1.5” +- mounts will be too tall for the 0, but the options for 1-1.2” one piece mounts are slim. I see spuhr and griffin. Not sure who else makes one |
|
|
|
|
Posted: 8/8/2023 1:50:43 PM EST
[Last Edit: UndrGrndPrdcts]
[#35]
Quote HistoryOriginally Posted By Duck_Hunt: Nice! That’s what I was thinking. Just bought a Atacr 4-16x42 to freshen up the mod 0 and was looking at mounts. Seems the 1.5” +- mounts will be too tall for the 0, but the options for 1-1.2” one piece mounts are slim. I see spuhr and griffin. Not sure who else makes one Quote HistoryOriginally Posted By Duck_Hunt: Originally Posted By UndrGrndPrdcts: Originally Posted By Duck_Hunt: Originally Posted By UndrGrndPrdcts: Originally Posted By towerofpower94: Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20230729_140734_jpg-2901786.JPG One of the new Midway 2-8x Leupys? Which mount is that? Looks good. Nope mk5 3.6-18 in a spuhr. @UndrGrndPrdcts What height spuhr is that? 1.18", SP-5001 Nice! That’s what I was thinking. Just bought a Atacr 4-16x42 to freshen up the mod 0 and was looking at mounts. Seems the 1.5” +- mounts will be too tall for the 0, but the options for 1-1.2” one piece mounts are slim. I see spuhr and griffin. Not sure who else makes one No one lol. Spuhr is the way though. Edit: 1" is not high enough. 1.15-1.25 is perfect. |
|
|
|
|
Posted: 8/9/2023 9:50:30 AM EST
[Last Edit: Duck_Hunt]
[#36]
Quote HistoryOriginally Posted By 5RWill: C1 max came in https://www.snipershide.com/shooting/attachments/thumbnail_img_6886-jpg.8109903/ @5RWill Nice! Is that the 1.3” c1 max version? Eta: nvm I see that was answered. Did you ever put on the offset 508? |
|
|
|
PA, USA
|
Posted: 8/9/2023 10:00:01 AM EST
[#37]
I've done all 3 Mods now, this is by far my favorite.
 
|
|
|
|
Posted: 8/9/2023 5:10:49 PM EST
[#38]
Quote HistoryOriginally Posted By ChrisWMT: I've done all 3 Mods now, this is by far my favorite. https://live.staticflickr.com/65535/53104602261_273a289f6e_b.jpg https://live.staticflickr.com/65535/53104806014_79d579550c_b.jpg Yeah...you're gonna need to paint that shit and report back. |
|
|
|
MS, USA
|
Posted: 8/10/2023 5:57:41 PM EST
[#39]
Quote HistoryOriginally Posted By Duck_Hunt: @5RWill Nice! Is that the 1.3” c1 max version? Eta: nvm I see that was answered. Did you ever put on the offset 508? Not yet. We moved into a house so new TV and the Steiner T6Xi are priorities for paying off right now. I plan to eventually but it's kinda low on the list honestly. Hell i don't even have a RDS on my p10c, despite having the plate and everything ready for it. |
|
|
|
Posted: 8/10/2023 9:49:04 PM EST
[#40]
Quote HistoryOriginally Posted By SecretSquirell: Yeah...you're gonna need to paint that shit and report back. Quote HistoryOriginally Posted By SecretSquirell: Originally Posted By ChrisWMT: I've done all 3 Mods now, this is by far my favorite. https://live.staticflickr.com/65535/53104602261_273a289f6e_b.jpg https://live.staticflickr.com/65535/53104806014_79d579550c_b.jpg Yeah...you're gonna need to paint that shit and report back. Rattle rattle rattle |
|
|
|
|
Posted: 8/18/2023 11:02:48 AM EST
[#41]
Scope question:
Would a tanodized Leupold Mk4 LRT 3.5-10 Illuminated TMR be considered correct across the breadth of Mod H builds? Midway has some again and I'm debating getting one. The base rifle would be FDE PRI Handguard, ACE stock, Sierra grip. |
|
|
|
|
Posted: 8/18/2023 3:28:47 PM EST
[#42]
Quote HistoryOriginally Posted By Midazoslam: Scope question: Would a tanodized Leupold Mk4 LRT 3.5-10 Illuminated TMR be considered correct across the breadth of Mod H builds? Midway has some again and I'm debating getting one. The base rifle would be FDE PRI Handguard, ACE stock, Sierra grip. Link? Just looked on Midway and only MK 4s as OOS and limited run. |
|
|
|
|
Posted: 8/18/2023 3:31:18 PM EST
[#43]
Quote HistoryOriginally Posted By towerofpower94: Link? Just looked on Midway and only MK 4s as OOS and limited run. https://www.midwayusa.com/product/1009619680?pid=928838 Code: OPTICS081523 gets it to $1338 delivered. There's 80 in stock currently. They'll be sitting on these for a while unless they drop the price. |
|
|
|
|
Posted: 8/18/2023 9:09:44 PM EST
[#44]
Where do you think they should be priced?
|
|
|
|
|
Posted: 8/18/2023 9:27:30 PM EST
[#45]
Quote HistoryOriginally Posted By Midazoslam: Where do you think they should be priced? $1338 isn’t bad, but I’ve seen a few used ones sit on the EE at $1400 for days before they sold in the last year or 2. I just don’t know how much demand there are for them. AFAIK they were only on m110s and Mod Hs. The peak in stock total I saw was 90. They’ve been available since Wednesday and as of this post there’s 78 left. Comparatively, the TS30s and black 2.5-10x40s they had the last few months sold about 50 (entire stock) in less than 24 hours. TS30s were under $1k with codes, 2.5-10s were $1134 with code. Again, not bad for $1338 but I’m gonna watch stock and see if they drop sub $1200. |
|
|
|
|
Posted: 8/18/2023 9:28:25 PM EST
[#46]
Quote HistoryOriginally Posted By Midazoslam: Where do you think they should be priced? They had a clearance sale a few years ago and I think they were going for about a grand. |
|
|
|
|
Posted: 8/19/2023 6:37:50 AM EST
[#47]
Were these tanodized ones actually issued at some point, unlike the recent batch of 2.5-8 optics that had the ‘upgrades’ to the illumination housing and battery cap tether?
Same vein as I debate black or FDE for a Mod H upper, were FDE uppers actually issued? |
|
|
|
|
Posted: 8/19/2023 8:18:26 AM EST
[Last Edit: WTFShane]
[#48]
Quote HistoryOriginally Posted By towerofpower94: Were these tanodized ones actually issued at some point, unlike the recent batch of 2.5-8 optics that had the ‘upgrades’ to the illumination housing and battery cap tether? Same vein as I debate black or FDE for a Mod H upper, were FDE uppers actually issued? No and yes. Edit: Recce rail might have been an afterthought as pics show unpainted vs the painted ones that are being included. |
|
|
|
|
Posted: 8/19/2023 9:00:29 AM EST
[#49]
Quote HistoryOriginally Posted By WTFShane: No and yes. Edit: Recce rail might have been an afterthought as pics show unpainted vs the painted ones that are being included. Quote HistoryOriginally Posted By WTFShane: Originally Posted By towerofpower94: Were these tanodized ones actually issued at some point, unlike the recent batch of 2.5-8 optics that had the ‘upgrades’ to the illumination housing and battery cap tether? Same vein as I debate black or FDE for a Mod H upper, were FDE uppers actually issued? No and yes. Edit: Recce rail might have been an afterthought as pics show unpainted vs the painted ones that are being included. Thanks. |
|
|
|
|
Posted: 8/22/2023 10:03:29 AM EST
[#50]
I scored the m110 mk4 for $955.
Birthday discount was 25% and it stacked with the 15% coupon. I guess my mod h will be further from being a complete and total bastard build now lol. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2023 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
