Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 9/22/2005 8:22:31 PM EDT
[Last Edit: 9/22/2005 8:22:51 PM EDT by brushdog]
I am using non-shrouded carriers for a couple of builds, will these hammers create a problem? Can the hammers be fixed or rounded off?

Link Posted: 9/22/2005 8:55:12 PM EDT
Before you jump the gate, try and see if you first have problems with the hammers catching on the firing pin collars before hacking at anything.
Link Posted: 9/23/2005 8:44:25 AM EDT
[Last Edit: 9/23/2005 5:39:51 PM EDT by SBR7_11]
Those is just "SP-1" style hammers (notch at top) as used originally with those carriers (SP-1) as designed by COLT to prevent a run-away if the hammer were to follow..

Just don'tt try to use them with the Colt pattern 9mm bolt.... use the hammer with the round top.

If you run the Olympic pistol caliber upper, then the SP-1 hammer is fine.
Link Posted: 9/27/2005 2:44:23 AM EDT
Thanks, I will give them a try before I replace them.
Top Top