Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/3/2003 9:11:58 PM EST
[Last Edit: 10/6/2003 8:30:23 PM EST by RPD20]
I just recieved my Colt Sporter 9mm yesterday. I have a couple of questions.

I replaced the fixed stock with a bushmaster 6 position tele stock I had on my .223 Bushy. Will the short buffer and spring that came with this stock work with the 9mm. Is there separate 9mm and .223 buffers/springs?

I dont care for the looks of this stock. I prefer the older style tele stocks. Can I use an older style stock on this 6 position buffer tube.
Link Posted: 10/4/2003 8:30:15 AM EST
[Last Edit: 10/4/2003 8:30:56 AM EST by Deanh]
The buffer springs depend on the buffer tube, not the caliber being shot. 9mm/223 use the same spring. You may want to use a heavier buffer to decrease felt recoil and lower some parts wear. I do not think the older style Colt 4 position stock will work on the newer style 6 position buffer tubes. I may be wrong as I have never tried it.
Link Posted: 10/4/2003 9:53:05 AM EST
Where do you get a heavier buffer? How do you tell its Hevier/Lighter? Are they marked? Did you mean heavier buffer spring?
Link Posted: 10/7/2003 4:13:16 AM EST
I have a Colt 9mm upper and I have been using it with my 5.56/223 RRA 6-position stock with the RRA buffer and spring and it has been working fine... I have also used this upper with a normal A2 stock assembly and it hasn't had a problem... If I were you, I would just try it and see if it works. If you have problems, then you can evaluate your options.
Top Top