Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
1/22/2020 12:12:56 PM
Posted: 9/20/2007 5:04:38 AM EST
Link Posted: 9/20/2007 6:46:13 AM EST
Link Posted: 9/20/2007 7:27:21 AM EST
Just placed my order

Thanks Tom!
Link Posted: 9/20/2007 9:23:49 AM EST
Link Posted: 9/20/2007 9:57:07 AM EST
[Last Edit: 9/20/2007 10:06:21 AM EST by twl]
Link Posted: 9/20/2007 10:08:21 AM EST
I'm almost glad you didn't get that one on the market (yet). You guys get almost as much of my money as my wife does.

It was good to talk to you again, Tom. Keep getting those toys out for us to play with.
Link Posted: 10/5/2007 12:07:19 PM EST
Link Posted: 10/6/2007 12:40:12 PM EST
Link Posted: 10/6/2007 1:03:07 PM EST
Link Posted: 10/6/2007 7:05:56 PM EST
Are there any other improvements made to the bolt except firing pin? I have a DPMS in 7.62X39 and heard a lot about weak bolts prone to breaking. It hasn't failed on me yet but it is like waiting for an accident to happen. Also DPMS extractor slipped on some rims on extraction and after examination the extractor is not grabbing the rim of the case on full circumference, only grabbing at outer edges and leaves marks clearly showing it. I put o-ring in the extractor to increase grabbing tension and it seems work better on extraction but leaves deep marks on the rim upon closing on a cartridge. What extractor are you using on on your bolts? Are they specifically made for 7.62X39 case? My DPMS extractor seems to be an extractor from different caliber bolt. Lastly, do you have any thoughts offering chrome-lined barrels in this caliber /at least as a limited run/? I am shooting russian surplus ammo exclusively /same as wolf/ and cleaning after shooting is no fun at all. And I can see that these ammo can play real hard on non-chromed bore.

Link Posted: 10/7/2007 4:14:32 AM EST
Link Posted: 10/8/2007 1:54:37 AM EST
Thanks for the reply. I will compare my extractor with regular 223 size boltface extractor. So far besides few feeding and extraction problems the gun shoots fine. The chrome-lined barrel in 7.62X39 will be a real good option for guys intending to shoot wolf or surplus ammo. Besides no one offered this type of barrel before so being a first comer isn't that bad thing too. If the c-products 7.62x39 mags will be successful a lot of guys will be building 7.62X39 uppers.
Link Posted: 10/8/2007 4:02:03 AM EST
Top Top