Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 12/22/2005 10:19:06 AM EST
I have a new barrel for my 6920 and want to build a new upper for it with that berrel. So i can keep the stock one together as extra. What do i need to do this and i would like to stay with colt? Or can i just buy a upper complete less the barrel and put my forend and barrel on?
Link Posted: 12/22/2005 12:12:43 PM EST
Yeah, you can buy an assembled upper with no barrel. To install your barrel, you'll need an action block, barrel wrench, some moly lube, and preferably a torque wrench.
Link Posted: 12/23/2005 4:18:28 AM EST
does anyone know where i can buy a colt m4 upper without a barrel and is there anything certain i should look for?
Link Posted: 12/23/2005 9:52:46 AM EST

Originally Posted By deserteaglexxx:
Does anyone know where I can buy a Colt M4 upper without a barrel?



S.A.W.

Part #SA03012

UPPER RECEIVER ASSEMBLY (.250) - M4 FLAT-TOP, INCLUDING EJECTION PORT COVER ASSEMBLY, FORWARD ASSIST ASSEMBLY -- $299.00.
Link Posted: 12/23/2005 4:09:03 PM EST
Then what else is needed the bolt group and what else?
Link Posted: 12/23/2005 4:17:28 PM EST

Originally Posted By deserteaglexxx:
Then what else is needed the bolt group and what else?



Assuming that you have a barrel and nothing else: bolt carrier assembly, charging handle, delta ring, weld spring, snap ring, gas tube, handguards, handguard cap, and flash suppressor.
Link Posted: 12/23/2005 4:21:35 PM EST
[Last Edit: 12/23/2005 4:22:28 PM EST by deserteaglexxx]
thanks thats what i needed to know all i have is the barrel. ialso have the dd handguard
Link Posted: 12/23/2005 8:20:43 PM EST

Originally Posted By M4Madness:

Originally Posted By deserteaglexxx:
Does anyone know where I can buy a Colt M4 upper without a barrel?



S.A.W.
Part #SA03012
UPPER RECEIVER ASSEMBLY (.250) - M4 FLAT-TOP, INCLUDING EJECTION PORT COVER ASSEMBLY, FORWARD ASSIST ASSEMBLY -- $299.00.



$299 for an upper with only a FA knob and a cover? ---- AAAAAAAAHHHHHHHHHHHHHHHH!!!!!!!!!

that­'s a lot of coin to get a part that doesn't even say "Colt" on it.

<runs screaming>

ar-jedi

ps:
globaltactical.com/axami/shop.php?grd=153&prd=201
and
here is everything BUT the barrel (inclusive of the BCG) for $234...
globaltactical.com/axami/shop.php?grd=153&prd=237

Link Posted: 12/23/2005 9:02:42 PM EST
Link Posted: 12/24/2005 4:46:18 AM EST

Originally Posted By Randall_Rausch:

Originally Posted By M4Madness:
S.A.W.

Part #SA03012

UPPER RECEIVER ASSEMBLY (.250) - M4 FLAT-TOP, INCLUDING EJECTION PORT COVER ASSEMBLY, FORWARD ASSIST ASSEMBLY -- $299.00.



While the Clot upper will have the cool little M4 stamp on the front of the receiver, there's not really anything else making it better than a CMT or LMT M4 receiver.
Either of these can be obtained for more like $125.
I know I have both of them in stock...



I was just going by his original request.


I would like to stay with Colt.
Link Posted: 12/24/2005 5:17:51 AM EST
With respect to the initial poster's request, there are things that should be Colt and things that really don't need to be Colt. Upper and lower receivers are two things that definitely DO NOT need to be Colt, but they are the visible, bling with the Colt markings that most want, so there you go.
Link Posted: 12/24/2005 5:30:01 AM EST
Thanks everyone great advice I'm going to have steve at adco build me an upper not going to worry about colt.
Top Top