Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
10/20/2017 1:01:18 AM
9/22/2017 12:11:25 AM
Posted: 8/19/2005 8:25:36 PM EDT
Well, I got the kit and it shoots really nice except it won' reset my trigger. It ejects and loads the next round perfect, but the trigger isn't reset so its a nice single shot right now. Any suggestions? Has anyone experienced this?
Link Posted: 8/19/2005 8:43:12 PM EDT
Link Posted: 8/20/2005 3:40:41 AM EDT
Sounds like your bolt is not coming all the way forward. You might try on of the Lakeside Machine springs.
Link Posted: 8/20/2005 3:57:59 AM EDT
A new stiff Ciener wants strong full power ammo such as CCI MINI MAGS for the break in period to get things slicked up . Hope this helps . Once you get the Ciener sorted out and running well you won't want to be without it . It is THE must have thing for an AR15 .
Link Posted: 8/20/2005 3:27:28 PM EDT
Thanks, I just remembered I was shooting subsonic ammo. to keep the noise down for the folks next door. I'll try full power stuff and let you know.
Link Posted: 8/20/2005 8:25:00 PM EDT
Dynapoints function great in mine, lightly oil the Ciener rails.
Link Posted: 8/20/2005 8:42:15 PM EDT
Thanks, I'm going send a lot of lead thru it tommorow, I'll try a bunch of different types and report back.
Link Posted: 8/25/2005 3:59:38 PM EDT
I finally shot some high velocity rounds through it and it shot fairly well. I had a couple of jams from the spent casings not ejecting properly. I think it also needs some break-in time.
Top Top