Need help installing MI 20 on RRA Entry Tact

AR-15 » Rifles, Uppers, Lowers, Barrels, and more

Site Notices

L3Harris Ground Panoramic Night Vision Goggle (GPNVG) Now Available EXCLUSIVELY at TNVC

1/23/2021 1:40:47 AM

[ARFCOM NEWS] Is The NRA Taking Its Ball And Going Home?

1/22/2021 9:36:51 PM

TNVC & Night Goggles Inc. vSHOTT 2021 - FINAL NIGHT Tonight 5pm Pacific Time - Biggest Announcement!

1/22/2021 8:50:48 PM

[ARCHIVED THREAD] - Need help installing MI 20 on RRA Entry Tact

Posted: 12/30/2006 11:48:12 AM EST

I picked up MI 20 rail system NIB had no instructions in box. Seems pretty simple I cannot get the large top rail to sit flush with the rail already on the upper. I took the delta ring off and the ribs/ springs but there is another ring that is keeping it from being seated. Does this get removed it seems to be on there pretty good I want to say it is the hand guard ring snap but I am not sure. it is not attached in all spots around the barrel there are some parts of it that are raised and not touching the barrel , it also looks like there is a channel that this ring fits into, but i wonder if it is part of the barrel nut?.

HELP

Posted: 12/30/2006 1:09:58 PM EST

Oh well I took it off there was no way this was working without it comming off. it was harder to get this snap ring off then cutting the delta ring

Posted: 12/30/2006 1:12:59 PM EST

The ring you're referring to is the snap ring that holds the delta ring assembly. Yes, it needs to be removed to install the MI #20

Posted: 12/30/2006 1:15:34 PM EST

Quoted:
The ring you're referring to is the snap ring that holds the delta ring assembly. Yes, it needs to be removed to install the MI #20

.

G24 I said to myself, I will wait until Glock24 responds since you gave me a ton of info before, but I could not wait (inpatient) I just went ahead and did it and come back to the computer and there you were with a response. I am glad it worked for me

thanks for all your help with me in making my decision

Posted: 12/30/2006 4:30:12 PM EST

Post pictures. Its a rule.

Posted: 12/30/2006 9:00:18 PM EST

Mine came with part of a sheet of instructions that looked like somebody clipped the top few inches off the whole sheet and then tore off the bottom half.
I had to assemble mine with basically no instructions, but it wasn't that big of a deal. I didn't think that much of it since it wasn't that hard, but I wonder if this is common?

Posted: 12/31/2006 7:48:04 AM EST

Quoted:
Post pictures. Its a rule.

As soon as I get a new front ring/horseshoe clamp. Mine would not accept a screw in one of the threaded holes

. So I emailed Troy at MI and I am waiting for a response!

Thanks for everyones help

Posted: 12/31/2006 7:50:20 AM EST

No worries. Troy will make it right.

We'll hold off locking your account for now, pending pictures of course.

Posted: 12/31/2006 7:51:34 AM EST

Quoted:
As soon as I get a new front ring/horseshoe clamp. Mine would not accept a screw in one of the threaded holes

. So I emailed Troy at MI and I am waiting for a response!

Thanks for everyones help

I've got an extra (used the HBAR bracket) if you need it. Let me know.

Posted: 1/1/2007 12:16:05 PM EST

Quoted:

Quoted:
As soon as I get a new front ring/horseshoe clamp. Mine would not accept a screw in one of the threaded holes

. So I emailed Troy at MI and I am waiting for a response!

Thanks for everyones help

I've got an extra (used the HBAR bracket) if you need it. Let me know.

thanks but Troy emailed me back and he is shipping one out Tomm. ! Happy New Year

[ARCHIVED THREAD] - Need help installing MI 20 on RRA Entry Tact

AR-15 » Rifles, Uppers, Lowers, Barrels, and more

Warning

Confirm Action

About AR15.COM

Stay Connected

Newsletter

Contact Us