Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/19/2003 12:18:34 PM EST
Just bought a Savage 10FP sniper rifle in 308. I wanna break in the barrel. Can somebody give me instructions.
Link Posted: 6/19/2003 1:13:44 PM EST
[Last Edit: 6/19/2003 1:15:13 PM EST by slidestop]
[b] Give this a look over it might answer your question. [url=http://groups.msn.com/TheMarylandAR15ShootersSite/barrelbreakinpage1.msnw]Breakin[/url] Good Luck SaFe ShOoTiNg Jerry [):)] [/b]
Link Posted: 6/20/2003 5:57:40 AM EST
Check out [url]http://www.jarheadtop.com/article_breakin.shtml[/url] It's written by Jack Kreiger. There's another break-in article written there as well. George Stringer (well known gunsmith) recommends a 1 shot & clean cycle 5 times, then 5 shots & clean cycle 5 times, then 10 shots & clean cycle until you reach 60 rounds. By "clean" he means from the breech end with a coated rod and copper-solvent soaked patch...10 passes of back-n-forth, let it soak for 5 minutes, then 1 more solvent wet patch for 10 strokes (in-n-out), then dry patches until bbl is dry. I did this with my .300 Win Mag and couldn't believe how the groups shrunk. --Otter
Link Posted: 6/26/2003 2:43:38 PM EST
barrell break in is BS, hokus pokus. Just shoot the damn thing. Clean it when you get done. If You Can't Stand the Pain, Don't Play The Game
Link Posted: 6/26/2003 6:55:43 PM EST
when i got my 10FP i shot <20rds cleaned and that was it. then shoot 240rds of Port. surplus and still shot under MOA, then cleaned again.
Link Posted: 6/27/2003 12:58:15 PM EST
I bought a Remy 700 in .308 new. All I did to break it in was shoot 5 shots swab a few times and repeat for about the first 50 shots. Then shoot and clean as usual. It shoots groups tighter than a gnats ass!
Top Top