Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/11/2003 3:40:57 PM EST
I have a jewell 2 stage trigger installed. I have had it for about exactly 2 years (birthday present). It has always functioned perfectly. So far, I really have not done anything to maintain the trigger. I have not cleaned the trigger at all since installed, it always looked clean enough and worked great. I did not use loctite on the adjustment screws, as I believe my instructions said it was not necessary. I do however clean the rest of the rifle and lube it after each day of use, I keep the gun REALLY clean-the bolt assy gets detailed every shooting. Today my AR doubled at the range. I almost wrote it off as a fluke but as I stood there getting ready to pull the trigger again, I felt some resistance at the first stage and possibly some grittyness. I am pretty sure I had not even started to pull the first stage, I just applied pressure and felt the resistance. I cleared the rifle and dry fired a couple times, it felt normal again. How do I clean the trigger mechanism? Can I just spray with CLP or will that leave too much residue to collect grime? I need some advice on the best way to maintain the Jewell, ALL info is appreciated.

Top Top