Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/10/2004 6:16:06 AM EST
My question is, is a 9mm bolt stop the same part as the 5.56 bolt stop? if not anyone know where I Can get a 9mm replacment along with the spring and pin? Thanks
Link Posted: 9/10/2004 6:00:52 PM EST
anyone have any suggestions?
Link Posted: 9/10/2004 11:18:23 PM EST
gunparts corporation

http://www.e-gunparts.com/productschem.asp?chrMasterModel=0660zCAR15%20-%20LOWER%20RECEIVER%20ASSEMBLY

look at item #1. you can order it right of the web.
Link Posted: 9/10/2004 11:20:12 PM EST
gunparts corporation

http://www.e-gunparts.com/productschem.asp?chrMasterModel=0660zCAR15%20-%20LOWER%20RECEIVER%20ASSEMBLY

www.e-gunparts.com/productschem.asp?chrMasterModel=0660zCAR15%20-%20LOWER%20RECEIVER%20ASSEMBLY

look at item #1. you can order it right of the web.
Link Posted: 9/12/2004 2:40:01 PM EST
[Last Edit: 9/12/2004 2:40:28 PM EST by cwm1150]
parts ordered now I will have to see if I can install them when they arrive
Link Posted: 9/16/2004 7:10:12 AM EST
don't worry its easy. the 9mm is different from the 5.56. some conversion blocks use standard 5.56mm stops and some don't . I guess I should have told you that before you ordered. I've seen colts made both ways. it really depends on the mag block. but unless you have colt mags it doesn't matter.

Let me know if you have any problems. And if you cant use the 9mm bolt stop that you bought I'll buy it from you, as I need another one.

JB-
Top Top