Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 4/11/2006 7:25:08 AM EST
I have a 24" barrel on my AR with a free-float tube, no rail system. The forward sling mount is mounted to the gas block and there is no fitting on the hand guard itself to mount a bi-pod too. Will I have to tap in a sling mount to put on the bi-pod or is there another way. Do any of you know if there is something that "clamps" onto the end of the tube itself, which would accommodate a bi-pod? Thanks for all your help.
Link Posted: 4/11/2006 7:28:42 AM EST
Here is a pic if it helps..
Link Posted: 4/11/2006 8:02:54 AM EST
Link Posted: 4/12/2006 3:27:35 PM EST
[Last Edit: 4/12/2006 3:48:30 PM EST by FollowMe]
Or you could swap your gas block out for a GB that has a rail on the top and the bottom. Then just put you bipod mount on the bottom of the gas block.

http://img134.imageshack.us/img134/4050/dsc02675fixed28te.th.jpg

http://img134.imageshack.us/img134/5563/dsc02676fixed27id.th.jpg
Link Posted: 4/12/2006 9:55:21 PM EST

Originally Posted By FollowMe:
Or you could swap your gas block out for a GB that has a rail on the top and the bottom. Then just put you bipod mount on the bottom of the gas block.

img134.imageshack.us/img134/4050/dsc02675fixed28te.th.jpg

img134.imageshack.us/img134/5563/dsc02676fixed27id.th.jpg



he could, but wouldnt that defeat the purpose of a FF tube

best bet is to drill and tap the FF tube; clamp on bipods on the bbl or on the gas block i would not do
Link Posted: 4/14/2006 8:31:10 AM EST
Great feedback guys, I appreciate it. I will get one on there soon!
Top Top