Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 7/2/2003 8:32:11 AM EST
[Last Edit: 7/2/2003 8:32:43 AM EST by gtcrispy]
Alright. I tried searching cause apparently I'm not smart enough to figure it out. What tool do I need to loosen it so it will fit over the flattop rails on my RRA M4. I can see that if you losen one side, it expands out. I tried a flathead screwdriver but that didn't seem to do anything. It seems pretty stiff when I tried to turn it and the screw drive popped out of the groove.
Link Posted: 7/2/2003 9:25:09 AM EST
You're on the right track... I used a flathead screwdriver and took the slotted nut all the way off. The I slid the sight into place, put the the square bolt through the slot and tightened it down. Oh, I also used a drop of the red Loctite that came with my SIR 50. [img]http://a8.cpimg.com/image/5A/C9/19917658-eab7-02000180-.jpg[/img] [img]http://a2.cpimg.com/image/5E/C9/19917662-e752-02000180-.jpg[/img]
Link Posted: 7/2/2003 9:55:53 AM EST
[Last Edit: 7/2/2003 10:09:18 AM EST by gtcrispy]
Alright thanks for the help. Finally got it. Took the charging handle out and it finally just slid right on :)
Top Top