Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/22/2006 9:30:46 PM EST
[Last Edit: 3/22/2006 9:39:36 PM EST by Variablebinary]
Possible? Or not?
Link Posted: 3/22/2006 11:24:11 PM EST
Sure. Just make sure you use a low profile gas block. MSTN does it all the time, check out their website, they should have some photos on there. I have a 16" midlength barrel using a JP Rifles VTAC forearm, but the principle behind it is the same.
Link Posted: 3/23/2006 5:18:24 AM EST
[Last Edit: 3/23/2006 5:22:22 AM EST by Variablebinary]

Originally Posted By caneau:
Sure. Just make sure you use a low profile gas block. MSTN does it all the time, check out their website, they should have some photos on there. I have a 16" midlength barrel using a JP Rifles VTAC forearm, but the principle behind it is the same.



I was going to use PRI fold down front sight. Would there be enough clearance with the PRI GEN III.

Nevermind I just found something on the MSTN site. This looks right

What muzzle brake is this firstly, in the first picture


Here is the classic ops inc SPR brake

Link Posted: 3/23/2006 6:00:49 AM EST
This is a Colt 16" barrel with the PRI rifle length tube. The inside diameter of the tube is 1.74" so any gas block smaller than that should work.


Top Top