Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 6/17/2009 2:01:07 PM EST
Dennys Billet Lower, Timney 4# Trigger, MIAD, A2 Stock w/ Duracoat. I'm expecting the mate, an 18" LaRue Stealth Upper in about a week or so, can't wait.



Link Posted: 6/17/2009 2:02:26 PM EST
Awesome!

I haven't done a billet build yet. How was Denny's lower to work with?
Link Posted: 6/17/2009 2:06:24 PM EST
Very nice

I think my next AR build just might have to be with a billet lower.
Link Posted: 6/17/2009 2:11:07 PM EST
Originally Posted By CJan_NH:
Awesome!

I haven't done a billet build yet. How was Denny's lower to work with?


Not bad at all, especially considering this is my first build.
Link Posted: 6/17/2009 2:12:24 PM EST
Very nice.
Link Posted: 6/17/2009 2:54:31 PM EST
Looks good.
Link Posted: 6/17/2009 3:22:51 PM EST
Originally Posted By SmokeyJ:
Very nice

I think my next AR build just might have to be with a billet lower.


I've got a TI (the company that makes Denny's lowers) and the only issue I had was with the mag catch gate interfering with the bolt catch. I just ground a little off of the bottom of the bolt catch and hit it with some cold blue.
Link Posted: 6/17/2009 3:34:52 PM EST
[Last Edit: 6/17/2009 3:35:46 PM EST by EWP]
^^^What LPK did you use, sounds to me more like a piece of the LPK was not in spec and not necessarily the lower receiver.
Link Posted: 6/17/2009 3:49:49 PM EST
[Last Edit: 6/17/2009 3:51:29 PM EST by Captains1911]
Originally Posted By JoshAston:
Originally Posted By SmokeyJ:
Very nice

I think my next AR build just might have to be with a billet lower.


I've got a TI (the company that makes Denny's lowers) and the only issue I had was with the mag catch gate interfering with the bolt catch. I just ground a little off of the bottom of the bolt catch and hit it with some cold blue.


I did have the exact same problem using a RRA bolt catch, the bottom of the catch interfered w/ the raised portion of the receiver around the mag release button. I swapped it out with a DPMS catch and the problem went away. I didn't mention it earlier because I had just assumed that the RRA catch was slightly out of spec. It wouldn't have been a problem with a standard forged receiver, but something to be aware with these due to their unique shape.

Was it a RRA bolt catch that gave you problems too?
Link Posted: 6/17/2009 3:58:26 PM EST
That is a nice looking lower.
Will a Norgon ambi mag catch work on that lower?
From what I see in the pic, I don't think it will..
Top Top