Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/15/2006 3:24:14 PM EST
[Last Edit: 1/15/2006 3:24:32 PM EST by Cape_hunter]
Anyone have a link to it? I have seen them that are just about complete less the magwell machining.

CH
Link Posted: 1/15/2006 5:42:24 PM EST
http://www.tanneryshop.com/PRODUCTS.html

Is this what your'w looking for? I beleive the FAB10 receiver has a solid magwell.
Link Posted: 1/15/2006 5:57:02 PM EST
There was an %80 reciever out there that had the biffer tapped and only required a few holes drilled to complete. I am looking for one for a 50 BMG lower. I plan to drill and tap into the magwell and mount a bipod extension to the front of the magwell. Similer to what you find on a EDM gun.
Link Posted: 1/16/2006 11:01:11 AM EST

Originally Posted By Cape_hunter:
There was an %80 reciever out there that had the biffer tapped and only required a few holes drilled to complete. I am looking for one for a 50 BMG lower. I plan to drill and tap into the magwell and mount a bipod extension to the front of the magwell. Similer to what you find on a EDM gun.



Is this it? shadetreearmory.com/catalog/product_info.php?cPath=21&products_id=29
Link Posted: 1/16/2006 11:11:06 AM EST

Originally Posted By Stanze:

Originally Posted By Cape_hunter:
There was an %80 reciever out there that had the biffer tapped and only required a few holes drilled to complete. I am looking for one for a 50 BMG lower. I plan to drill and tap into the magwell and mount a bipod extension to the front of the magwell. Similer to what you find on a EDM gun.



Is this it? shadetreearmory.com/catalog/product_info.php?cPath=21&products_id=29



Nope, that one has the magwell cut.
Tannery shop has a dummy with a solid magwell, but the firecontrol area is not fully machined. I think this will be the closest I can get. Though I do remember seeing them as I described.

Link Posted: 1/23/2006 8:58:24 PM EST
SOLID MAG WELL, MACHINED FROM 7075 FORGED ALUMINUM
70% FORGED REC-50 BMG...................119.95

FROM
HTTP://WWW.TANNERYSHOP.COM

WILLIAM
Link Posted: 1/24/2006 5:53:21 AM EST

Originally Posted By tannery_shop:
SOLID MAG WELL, MACHINED FROM 7075 FORGED ALUMINUM
70% FORGED REC-50 BMG...................119.95

FROM
HTTP://WWW.TANNERYSHOP.COM

WILLIAM



Possible to get a picture ?
Top Top