Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/30/2006 5:15:52 PM EST
I'm building an Mk12 and would like to see some of those eho have an Mk12 MOD 0/1. I haven't fully decided if I want the MOD 0 or MOD 1. So if you would, give me your opinion on what you think is best and what you think is cheaper to make (I like both the MOD 0 and 1) All I have at the moment is the upper and the bbl. I would greatly appriciate your pictures and input.

Thanks!
Link Posted: 1/30/2006 5:41:08 PM EST
Link Posted: 1/30/2006 5:42:53 PM EST
Rookie....
Link Posted: 1/30/2006 5:46:46 PM EST
Link Posted: 1/30/2006 5:56:40 PM EST

Originally Posted By bigbore:
www.besthdw.com/test/mod1stoship.jpg



WOW

Link Posted: 1/30/2006 5:59:58 PM EST
nice rack!


sorry, couldn't resist that.
Link Posted: 1/30/2006 6:01:00 PM EST

Originally Posted By bigbore:
www.besthdw.com/test/mod1stoship.jpg



You just love pulling that shit out, don't you.
Link Posted: 1/30/2006 6:02:28 PM EST
Link Posted: 1/30/2006 7:10:55 PM EST
[Last Edit: 1/30/2006 7:14:50 PM EST by mongo001]
Mod 1 is the way to go.

Link Posted: 1/30/2006 7:28:43 PM EST

Originally Posted By mongo001:
Mod 1 is the way to go.

img82.imageshack.us/img82/5624/nearcompletespr1zc.jpg



Hey mongo, what height are your rings?? I'm assuming those are the Arms ones. But I'm trying to figure out what height I would need. I want them high. A little higher than what you'd be looking at for the irons. Yours look like they'd be what I'm looking for.
Link Posted: 1/30/2006 7:30:12 PM EST
ARMS #22 high.
Link Posted: 1/30/2006 9:29:04 PM EST
[Last Edit: 1/30/2006 9:30:06 PM EST by Humminbird]
Link Posted: 1/31/2006 3:17:57 AM EST
Here is my ADCO built mod 1. Now if I could only get the OPS can..

Link Posted: 1/31/2006 3:53:29 AM EST
I am leaning a bit toward the MOD 1 side. How much did it generally cost you to build/buy it?
Link Posted: 1/31/2006 4:23:34 AM EST
Perty stick mongo.........
I like the A1 Voltor over the 6 pos stock
Link Posted: 1/31/2006 4:35:19 AM EST

Originally Posted By bigbore:
www.besthdw.com/test/mod1stoship.jpg



Link Posted: 1/31/2006 7:49:18 AM EST
I think the whole rifle was in the 2500 neighborhood. Prices have gone up on some things like the KAC RAS and the Leupold scope since I got mine. I don't have a geat deal of paitence to build so I bought mine and couldn't be happier.
Link Posted: 1/31/2006 8:07:43 AM EST

Originally Posted By bigbore:
www.besthdw.com/test/mod1stoship.jpg



OK..who's been taking secret pics of my walk in safe?

Not a true Mk12, but in the spirit of it-

Link Posted: 1/31/2006 12:48:47 PM EST

Originally Posted By 13gunbunny:
Perty stick mongo.........
I like the A1 Voltor over the 6 pos stock



I found out that between bench and prone, there was no stock movement with the adjustable stock, so I went with the fixed one. Of course, I don't have to wear body armor, so a shorter pull won't be an issue with me.
Link Posted: 1/31/2006 3:38:11 PM EST

Originally Posted By mongo001:
ARMS #22 high.



Is it higher than what you would look through the irons?? Or the same? Or lower? It seems like it's a hair higher and that would be just the ticket. I guy at a gunstore told me I HAD to have the extra high. Maybe he thinks you HAVE to clear the FSB. I don't know. I just never got to look through any of the heights, but I know what I'd like. Thanks for the info.
Link Posted: 1/31/2006 3:44:55 PM EST

Originally Posted By JJREA:

Originally Posted By mongo001:
ARMS #22 high.



Is it higher than what you would look through the irons?? Or the same? Or lower? It seems like it's a hair higher and that would be just the ticket. I guy at a gunstore told me I HAD to have the extra high. Maybe he thinks you HAVE to clear the FSB. I don't know. I just never got to look through any of the heights, but I know what I'd like. Thanks for the info.



You don't really need to clear the FSB. With high rings, I have a tight, normal cheek weld on the stock, very similiar to, if not the same as, using irons.
Link Posted: 1/31/2006 3:54:08 PM EST

Originally Posted By mongo001:

Originally Posted By JJREA:

Originally Posted By mongo001:
ARMS #22 high.



Is it higher than what you would look through the irons?? Or the same? Or lower? It seems like it's a hair higher and that would be just the ticket. I guy at a gunstore told me I HAD to have the extra high. Maybe he thinks you HAVE to clear the FSB. I don't know. I just never got to look through any of the heights, but I know what I'd like. Thanks for the info.



You don't really need to clear the FSB. With high rings, I have a tight, normal cheek weld on the stock, very similiar to, if not the same as, using irons.



Thanks man. Now I'm glad I didn't buy the "low" set that Steve had in stock!!!!
Link Posted: 1/31/2006 4:08:02 PM EST
I have 22H's as well...I have no trouble with cheekweld on mine...
Link Posted: 2/9/2006 6:14:06 PM EST
[Last Edit: 2/9/2006 6:19:05 PM EST by dangerdan]
Just ordered a low profile gas block, rifle length gas tube, KAC rife FF RAS (found at PDC for $360) and some tools. Now I am just waiting for the parts to come in to get the basics of the upper built. I'll get some 10W-30/40 oil when my parts come in for the barrel nut threads.

Whats left:
ARMS #22H rings
Super Sniper scope
BUIS's
KAC bipod adapter/ KAC RAS stud
Bipod
B/BC/CH w/ badger tac latch
Ops Inc brake

I have found a source for the Ops Inc brake, hopefully he'll have some sets in soon. Or maybe find a set for me at the SHOT SHOW, if you're able to buy products there.
Top Top