Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/6/2004 10:44:10 PM EST
I’m sure it’s been done before, but lets see some pics of your sub-caliber arf!

Here’s mine. A little Colt 9mm. I registered it as an SBR and had the barrel cut down to 10-inches. The thing is an absolute blast to shoot.


Link Posted: 9/7/2004 5:32:00 PM EST
[Last Edit: 9/7/2004 5:33:27 PM EST by Snake45]
Okay, I'll play. Here's my much-mentioned DPMS .22 M4 upper on a pre-ban EA/Quality Parts (now Bushmaster) lower, with a $18 gun show 4x compact Chinese scope, $10 gun show mount, and $9 Walmart rings. This lash-up will put shoot Winchester Dynapoints into 3/8" @25 all day long; best group @ 50 so far is about .665" with most groups running at or just under an inch. I guess the kid and I are getting close to 2000 troublefree rounds through it with no more maintenance than some Rem Oil on the bolt and recoil spring every so often. (Cleaning guns is for COLD weather!)

Oops, forgot to mention the cheap fake $50 SARCO Chinese copy carry handle.

I LIKE this thing.

Link Posted: 9/8/2004 4:19:22 PM EST

Originally Posted By ch139:
I’m sure it’s been done before, but lets see some pics of your sub-caliber arf!

Here’s mine. A little Colt 9mm. I registered it as an SBR and had the barrel cut down to 10-inches. The thing is an absolute blast to shoot.

img.photobucket.com/albums/1103/Monster11/arf/df747c7b.jpg



Originally Posted By JTR8541:
img4.photobucket.com/albums/0603/JTR8541/AKs/2x_head_on.jpg
Hungarian SA 85M and Bulgarian SLR 100H

img4.photobucket.com/albums/0603/JTR8541/Scopes/d1fffdc6.jpg
M49

img4.photobucket.com/albums/1103/Monster11/fam/9b8d8586.jpg
Vector Arms Uzi


And since it's an arf forum...
img4.photobucket.com/albums/1103/Monster11/arf/df747c7b.jpg
9mm Colt SBR


you and JTR8541 have the same 9mm
Link Posted: 9/8/2004 5:05:30 PM EST
Link Posted: 9/8/2004 5:38:09 PM EST


www.ar15.com/forums/topic.html?b=3&f=118&t=191868&page=3


Originally Posted By JTR8541:
Alright, I’ll play along too. My plain Jane little 9mm Colt SBR.

img4.photobucket.com/albums/1103/Monster11/arf/df747c7b.jpg



Link Posted: 9/8/2004 5:39:55 PM EST
[Last Edit: 9/11/2004 5:42:34 AM EST by brushdog]
Here's mine, but I recently replaced the green with all black RRA furniture.
40.cal




And just waiting for my 9mm barrel to be delivered!

Link Posted: 9/8/2004 6:53:39 PM EST
Went back an Old school setup as well....Udog
Link Posted: 9/9/2004 8:47:17 AM EST

Originally Posted By H_upmann:
you and JTR8541 have the same 9mm



It's all me!

I originally registered as ch139 but never really spent much time here. Started hanging out more and more about a year ago, but I couldn’t remember my original username so I created JTR8541. I recently came across a scrap piece of paper with the info on it so I just changed gears. I apologize for the confusion. Thanks for paying attention to my rifle though.
Link Posted: 9/9/2004 9:46:25 AM EST
[Last Edit: 9/9/2004 9:47:49 AM EST by Offspring]
This is an old picture. It is in the middle of a no-ban transformation now.



Link Posted: 9/9/2004 5:32:47 PM EST
Guess I'll show mine as well.



Link Posted: 9/9/2004 5:49:50 PM EST
Link Posted: 9/10/2004 3:37:48 PM EST
Link Posted: 9/10/2004 7:36:44 PM EST


For video, click on the link: home.netcom.com/~brownhen/id2.html

Dan
Link Posted: 9/11/2004 4:04:02 AM EST
This is the insides -




Bodywork attached -

Link Posted: 9/11/2004 10:27:54 AM EST
[Last Edit: 9/11/2004 10:28:49 AM EST by M4-TUNA]
IT will have a Car VLTOR on it VERY SOOOONNNN!!!!!!!!
Link Posted: 9/11/2004 2:39:35 PM EST
here ya go...



J
Link Posted: 9/11/2004 7:57:38 PM EST
[Last Edit: 9/11/2004 7:59:45 PM EST by Gunbert]

Originally Posted By SBR7_11:
This is the insides -




Bodywork attached -





Is that an AWC Mk 9 suppressor? If it is I'm really curious what you used for the free float handguard... I want to do something very similar to this, but since my MK 9 has a large 2" OD, I am having a tough time finding a tube that will fit over the can.
Link Posted: 9/12/2004 4:32:49 AM EST
AWC Mk9, Uzi mount. The tube is from Kurt Kustom Firearm (aka KKF here at AR15.com).

refer to IM, sent it before I came here.
Link Posted: 9/12/2004 5:02:52 AM EST
Gunbert, I have an AWCMK9 and got the idea from SBR7_11 and joeblack. I use a nomex cover and hold onto the suppressor while shooting. Here are a couple of pics. This may be another option?

Click on the link for detailed info: M16/9

Dan



The paracord is a removeable sling swivel.




Link Posted: 9/12/2004 10:48:58 AM EST

Originally Posted By brushdog:
Here's mine, but I recently replaced the green with all black RRA furniture.
40.cal

img.photobucket.com/albums/v364/Tomtx/RRA40.jpg


And just waiting for my 9mm barrel to be delivered!

img.photobucket.com/albums/v364/Tomtx/OLY9MM.jpg



What magazine is on the lower in the bottom pic?
Link Posted: 9/12/2004 1:31:04 PM EST

Originally Posted By AR223:

What magazine is on the lower in the bottom pic?



They are 40 round FX / Simunition mags. There are also 20 and 30 rd mags. They were original clear plastic, but I used a little krylon to paint them, leaving a window to count the rounds. They also hold the bolt open on the last round.

I've called around a few places to find some more, but the dealers that I've talked to will only sell them directly to LE Training Departments. Maybe soon we might be able to buy them or someone will make a metal version.





Link Posted: 9/12/2004 2:36:42 PM EST
[Last Edit: 9/12/2004 2:43:17 PM EST by SBR7_11]
Gunbert, Dans method would be the easiest/least expensive, just need to bring yourself to cut a perfectly good tube.

As to the can wrapping, Dolpin Shooters (wife "Beep" makes them) can wrapper would be a nice solution to grabbing the can.
Link Posted: 9/12/2004 11:35:46 PM EST

Originally Posted By brushdog:

Originally Posted By AR223:

What magazine is on the lower in the bottom pic?



They are 40 round FX / Simunition mags. There are also 20 and 30 rd mags. They were original clear plastic, but I used a little krylon to paint them, leaving a window to count the rounds. They also hold the bolt open on the last round.

I've called around a few places to find some more, but the dealers that I've talked to will only sell them directly to LE Training Departments. Maybe soon we might be able to buy them or someone will make a metal version.

img.photobucket.com/albums/v364/Tomtx/FXMag.jpg


That is very cool. How well built are they?

S.O.
img.photobucket.com/albums/v364/Tomtx/FXMag2.jpg

img.photobucket.com/albums/v364/Tomtx/FXMag3.jpg

Link Posted: 9/12/2004 11:36:29 PM EST

Originally Posted By Offspring:
This is an old picture. It is in the middle of a no-ban transformation now.






Who's mag block is that?

S.O.
Link Posted: 9/13/2004 5:50:51 AM EST
[Last Edit: 9/15/2004 5:56:22 PM EST by brushdog]

Originally Posted By SorryOciffer:

That is very cool. How well built are they?

S.O.



When I got them, 3 out of the 6 were spliting down the middle - they are built from two pieces that are bonded together. I used a little super glue and they are holding up. But they were over ten years old. Kind of like the old ramline 10/22 mags that would split after heavy use. They also have the Rame-line type of wound spring.

I've had a chance to use some of the newer 30 rd mags and they look better made with a regular spring.
Link Posted: 9/13/2004 11:58:53 AM EST
VM Hytech mag block.

Here is an updated pic:
Link Posted: 9/13/2004 7:09:07 PM EST

Originally Posted By Offspring:
VM Hytech mag block.

Here is an updated pic:




How well do you guys who are using this block like it?
Ups? Downs?
S.O.
Link Posted: 9/14/2004 7:00:57 AM EST
[Last Edit: 9/14/2004 7:02:26 AM EST by SBR7_11]

Originally Posted By SorryOciffer:


How well do you guys who are using this block like it?
Ups? Downs?
S.O.



Does exactly what is supposed to do.... hold plain old Uzi mag in position for feeding of Colt patterm 9mm system.

Be advised, as posted in another thread-reply, it is cut from the factory to use the "mil-contract" mags, those that have the folded seam down the rear of the mag body... Commercial IMI will not fit, as you need to open the rear corner radius inside the block, refer to the Hy-Tech fitting thread tacked at top of page.

Only negative is the Uzi mag release is backwards...
Top Top